SuzukiSavage.com - Re: Chain coversion for the Savage/S40

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Re: Chain coversion for the Savage/S40

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Re: Chain coversion for the Savage/S40 (Read 37 times)

Motopsycho1305

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 8

Re: Chain coversion for the Savage/S40
08/05/21 at 15:15:56

I know, I know, I know. This subject has been done to death. But I can't seem to find the old post so any help would be appreciated. So I believe I saw somewhere on this forum that someone posted the sprocket size, front and rear, to make it the same as stock pulleys. They did say that there was a fitting problem with the front cause of clearance but I will be running an off set sprocket(running larger rear wheel) and so it might be ok. Thanks guys!

IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 17867
Camp Springs, Kentucky
Gender: male

Re: Chain coversion for the Savage/S40
Reply #1 - 08/06/21 at 04:51:17

There is an Index with links in the Technical Section......you can find all kind of things there:
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1181745927

Or you can use the Search button at the top middle of the page (don't use the one on the top right of the page it is worthless). You will have to put in some parameters like how far back you want to look, what section you want to look, etc.

Someday I will be old......But not today!

IP Logged

Motopsycho1305 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Re: Chain coversion for the Savage/S40 Reply #2 - 08/06/21 at 16:09:30 Thanks
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home