SuzukiSavage.com - Piston

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Piston

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Piston (Read 69 times)

haggis57 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 20	Piston 02/16/21 at 08:18:13 Does the piston head surface have a coating ?
Back to top	IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18115 Camp Springs, Kentucky Gender:	Re: Piston Reply #1 - 02/16/21 at 12:26:54 No
Back to top	Someday I will be old......But not today! IP Logged

Gary_in_NJ Serious Thumper Offline LS650 Cafe Racer Posts: 2633 Amongst the Twisty Roads	Re: Piston Reply #2 - 02/16/21 at 13:54:22 Why do you ask? Are you looking to remove carbon build-up on the piston?
Back to top	A life-time student of motorcycling. LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG IP Logged

haggis57 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 20	Re: Piston Reply #3 - 02/17/21 at 18:51:50 Already cleaned the head and piston surface of carbon.The piston surface showed up with one spot of bright Aluminum...I'm Like "oh nuts ..I've gone too far"... but if there's no coating I will keep going .
Back to top	IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18115 Camp Springs, Kentucky Gender:	Re: Piston Reply #4 - 02/18/21 at 04:35:24 Just get off the thick carbon - you don't need to make it bright and shiny. Get it clean enough that you can install the rings and put back on the bike without any crud. The top will get all black and yucky looking again as you ride.
Back to top	Someday I will be old......But not today! IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home