SuzukiSavage.com - WTB: 1986 harness, CDI

1986 savage YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 5	WTB: 1986 harness, CDI 11/01/20 at 18:29:13 Need a harness for 86 resto-mod I am working on. I also suspect my CDI to be bad so I need a replacement. located in Bethesda, MD -Hunter
Back to top	IP Logged

SoC Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 501 New Jersey Gender:	Re: WTB: 1986 harness, CDI Reply #1 - 11/02/20 at 08:06:29 I have a harness from an '03' I believe is compatable, not many differences from 87 as too connectors. Others who know might offer details if there is some difference.
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28780
L.A. California
Gender: male

Re: WTB: 1986 harness, CDI
Reply #2 - 11/02/20 at 11:32:50

The wiring is different between 86 and 03.
hell, wiring is different between 86 and 87.
so the handlebar controllers may not work... correctly.
the TCI (ig box) has a different connector.
you need a new TCI so it may be an option but if you do you'll need to swap the rotor for a newer one.
The signal light connectors maybe different, not sure.

so if you're going to use the 03 harness, you may want to replace everything.

Back to top

Versey's Place
Tech Section Index

IP Logged

1986 savage

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 5

Re: WTB: 1986 harness, CDI
Reply #3 - 11/04/20 at 08:59:15

verslagen1 wrote on 11/02/20 at 11:32:50:

The wiring is different between 86 and 03.
hell, wiring is different between 86 and 87.
so the handlebar controllers may not work... correctly.
the TCI (ig box) has a different connector.
you need a new TCI so it may be an option but if you do you'll need to swap the rotor for a newer one.
The signal light connectors maybe different, not sure.

so if you're going to use the 03 harness, you may want to replace everything.

At this point I already have to replace the whole electrical system, except for the reg/rec. I'm also planning to add new lights, signals and handlebar controls. My other option is to use Clymer's to solder one together, but I would still need new connectors.

Also, thanks for that cam chain tensioner!

Back to top

IP Logged