justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
YIKES! San Antonio? Boot camp was Hot,, and I was young then,, and had lived in Odessa,, Yeah,, closin the garage and swingin hammers,, hot,,
Ya know, a Harbor Freight panel cutter with a planishing hammer face in it can accomplish many minutes worth of hammering right quick,, A mount for it over a vise with the proper dolly in it and a foot controlled air valve, of course ya gotta have the air chisel valve open, do a lot right quick that way,, and ya dont hafta run it wide open,, You can get a cheap set of tools, cut them off and weld whatever shape ya want on, And having one of those tools around is handy in other places,, like driving a bushing or bearing out,, Ive smacked on stuff with a 4 pound hammer and a punch, never even budge,, spent 10 or 15 minutes wearing me out,, and put an appropriate shaped tool in the panel cutter and Braaap,, DONE,, I have an old , treasured one I treat with more respect and a new HF one I treat like a rented mule,,
If you dont have a compressor,, You need one,, everyone needs a compressor,, because Tires,, If ya get a small compressor, be aware of the Duty Cycle,, Youll kill it,, When the compressor kicks in,, stop, let it catch up,, and dont add a biggo volume tank,, No room? An air conditioner condensor pad outside, and a quick shed over it,,
|