SuzukiSavage.com - Is TDC really that important to check valve timing

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Is TDC really that important to check valve timing

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1

Is TDC really that important to check valve timing (Read 46 times)

ckahleer Full Member Offline SuzukiSavage.com Rocks! Posts: 121	Is TDC really that important to check valve timing 08/26/20 at 15:12:31 I have found anywhere not on the cam lobe, give the same results as tdc when checking valve gap.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: Is TDC really that important to check valve ti Reply #1 - 08/26/20 at 15:33:08 If you're talking precisely on TDC vs. in the ballpark of TDC... yeah probably. But if you're talking TDC on the compression stroke vs exhaust... no way, there's a big difference.
Back to top	Versey's Place Tech Section Index IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18099 Camp Springs, Kentucky Gender:	Re: Is TDC really that important to check valve ti Reply #2 - 08/27/20 at 01:48:39 As long as the rocker is on the round "base" of the cam and not on any one of the ramps where the cam is pushing on the rocker - you are likely to get the same clearance value. So you don't have to have the TDC marks perfectly in alignment - but they should be within sight of each other.
Back to top	Someday I will be old......But not today! IP Logged

Pages: 1

« Home