SuzukiSavage.com - Torque for head cover bolts

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Torque for head cover bolts

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Torque for head cover bolts (Read 29 times)

RocketScienceSmurf

Senior Member

Offline

SuzukiSavage.com
Rocks!

Posts: 268
Sweden
Gender: male

Torque for head cover bolts
07/16/20 at 07:45:12

I am about to put my engine back together but partly since English is not my first language, I am having a hard time figuring out the torque for the bolts since there are no pictures to explain it. What is the head cover - cover plug?

I think the 13 bolts attaching the head cover to the cylinder head is 8-12Nm but what are the plugs requiring 25-30Nm ?

head_cover_torques.png

IP Logged

norm92de Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1180 El Paso TX Gender:	Re: Torque for head cover bolts Reply #1 - 07/16/20 at 12:40:03 The torque for the cover bolts is 6 ftlbs. Be very careful not to over torque them. I don't know what the cover plug bolts are but they must be much larger than 6mm bolts.
Back to top	2014 S40. Raptor. idle mixture adj.Needle raised one notch. 4000' altitude. Stock jets. Shell Rotella synthetic. IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home