justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
The pilot screw still does nothing when adjusted or turned all the way in. Is this normal?
While the Idle screw is set high, yes, that wont be adjustable.. Gotta set the idle low,, and have it warmed up AND turn the screw S L O W LEE.. NOt a bad plan to have the bikke as close to vertical as possible and if it takes too long, hop on, ride around Dont sit there and let it get too hot,,,,I did mine at stop lites.. No hurries,, 1100 RPM,, Idle speed,, If you can idle in first and be runnin 10 MPH,, thats about right, IIRC,, Of course if thats even slightly uphill,, then its getting too much gas, Level ground, no headwind,,
|