Nope......the DR650 head has the exhaust port on the left side of the head, the exhaust port on the Savage is on the right side.

  Only the newer DR650SE as the exhaust port on the left. the older DR650S  (early 90's)  is on the right , It has some wild bends and I have no idea of the size or fit to a Savage. It doesn't appear that you can by one new from a dealer ,and finding one in good condition used may prove impossible , I'd have a shop make you a custom pipe .(all shining and no dents)

I have no idea , but even if the pipe was the right size and the flange bolts up ,You would still end up having to bend the pipe,the cylinder on the Savage is upright and the DR cylinder leans forward, and you want to be sure the pipe was no larger than 1.5"-ID

Exactly Spammy! As long as the flange is the right size.

DDR riders must belong to a secret society. I joined the group and posted my request...Not one person has responded with any flange or port dimensions for me!

Mark

I tried a 90's DR650 some years back and it did not fit.
The bend in the pipe was too tight and the flange/pipe did not either.

Actually Lancer, can you remember what year the exhaust was from, as they changed the design in 1996.
Mark