SuzukiSavage.com - 40 hp/40lbs torque verse 50/50

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › 40 hp/40lbs torque verse 50/50

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1 2

40 hp/40lbs torque verse 50/50 (Read 212 times)

BrokeAss Junior Member Offline SuzukiSavage.com Rocks! Posts: 69	Re: 40 hp/40lbs torque verse 50/50 Reply #15 - 09/29/19 at 14:02:57 Braided stainless line, synthetic DOT4, and sintered pads...this bike weighs 350lbs properly bobbed/lightened, no need to perform unintentional stoppies...
Back to top	IP Logged

Ruttly Serious Thumper Offline Thumpers Rule Posts: 5099 Manteca , CA Gender:	Re: 40 hp/40lbs torque verse 50/50 Reply #16 - 09/29/19 at 14:44:10 Yeah the big brake upgrade is a must. Two fingers effortlessly stops me , I rarely use the rear brake now. At 315 lb it makes a dramatic difference , not to mention I have lost close to 30 lbs myself.
Back to top	The Topic Terminator IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28644 Tucson Az Gender:	Re: 40 hp/40lbs torque verse 50/50 Reply #17 - 09/29/19 at 15:45:04 You might be interested in playing around with this... https://www.gearingcommander.com/ Select Suzuki LS 650 Stock numbers are already there.
Back to top	Ludicrous Speed !... ... ... IP Logged

philthymike Serious Thumper Offline Wallowing in my own crapulence Posts: 1413 Philadelphia Area Gender:	Re: 40 hp/40lbs torque verse 50/50 Reply #18 - 09/29/19 at 16:39:42 Armen wrote on 09/29/19 at 13:48:02: Philthy, Have you seen the brake upgrade kit with the R6 caliper and larger rotor offered on the list a while ago? Put one on mine I never saw it. Too far into my current brake upgrade project to go another direction at this point. How do you like it?
Back to top	07 S40 (Thumpy): 666cc big bore, stage 2 webcam, dyna muffler, 412 shocks, Barnett clutch, Kawasaki ZL900 FE IP Logged

Gary_in_NJ Serious Thumper Offline LS650 Cafe Racer Posts: 2633 Amongst the Twisty Roads	Re: 40 hp/40lbs torque verse 50/50 Reply #19 - 09/29/19 at 20:02:18 Check out the big brake kit on my bike.. it’s a thing of beauty and works like a modern performance brake should. https://www.facebook.com/rycamotors/photos/a.391639964189140/1617099358309855...
Back to top	A life-time student of motorcycling. LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG IP Logged

Armen Serious Thumper Offline Half-Witted Wrench-Jockey from Jersey Posts: 1452	Re: 40 hp/40lbs torque verse 50/50 Reply #20 - 09/30/19 at 06:35:14 Gary, If the belt setup is in good shape, just swap the front pulley for one of the modified Kawi ones with 2 more teeth.
Back to top	In theory, theory and reality are the same. In reality, they aren't... IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10661 Oklahoma Gender:	Re: 40 hp/40lbs torque verse 50/50 Reply #21 - 09/30/19 at 10:56:27 Dave wrote on 09/29/19 at 10:22:42: LANCER wrote on 09/29/19 at 09:06:17: I had a ‘56 BSA Goldstar 500 years ago. It might seem like it was 500 years ago - but it likely was less than that! Yes, it was a bit less than 500 years to my best recollection. Maybe “500cc” would be more helpful ?
Back to top	IP Logged

Pages: 1 2

« Home