SuzukiSavage.com - 94mm wiseco

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › 94mm wiseco

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

94mm wiseco (Read 48 times)

ZSteele Senior Member Offline I'll finish it tomorrow Posts: 253	94mm wiseco 09/20/19 at 21:21:20 Whose switched to this and what was the process like? Im having trouble finding any info on the forum.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28752 L.A. California Gender:	Re: 94mm wiseco Reply #1 - 09/20/19 at 21:24:59 I have a 95, lancer didn't have those till a year later. shouldn't be a problem for the 94. check the bore, hone it, put in the piston according to the mfr's instructions. I found it much harder to put in the blinker fluid.
Back to top	Versey's Place Tech Section Index IP Logged

Rglad91 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 9	Re: 94mm wiseco Reply #2 - 09/21/19 at 19:50:20 I put one of lancers 94mm pistons in along with some other stuff. Let me say I’ve never really done much more then some oil changes on engines and was a bit nervous when it came time to fire it up. But it started right up and runs better now then the factory setup did. Goes right back in the way you take it apart
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home