Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Throttle housing, aftermarket?
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Throttle housing, aftermarket? (Read 67 times)
Tacopimp
Full Member
Offline
ihatemonix.com
Posts: 100
South Jersey
Gender:
Throttle housing, aftermarket?
08/14/19 at 18:09:10
Has anyone found a throttle housing that will work with our stock cable? The one I ordered didn't work because I couldn't get the throttle cable through the hole on the housing since the little piece on the end of the cable wouldn't fit through the hole.
Back to top
2000 Savage
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Throttle housing, aftermarket?
Reply #1 -
08/14/19 at 23:30:55
I've never messed with that, but maybe you are supposed to pull the cable off the bike and thread it through that hole.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
Tacopimp
Full Member
Offline
ihatemonix.com
Posts: 100
South Jersey
Gender:
Re: Throttle housing, aftermarket?
Reply #2 -
08/15/19 at 05:26:16
justin_o_guy2 wrote
on 08/14/19 at 23:30:55:
I've never messed with that, but maybe you are supposed to pull the cable off the bike and thread it through that hole.
Not sure what you mean, the little tiny barrel thing at the end of the cable is soldered onto the end of the cable.
Back to top
2000 Savage
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Throttle housing, aftermarket?
Reply #3 -
08/15/19 at 05:36:46
What's on the other end?
Maybe take the whole cable off the bike, poke it thru the hole, and run it back to the carburetor?
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
ZSteele
Senior Member
Offline
I'll finish it
tomorrow
Posts: 253
Re: Throttle housing, aftermarket?
Reply #4 -
08/15/19 at 10:02:42
I drilled the hole on my aftermarket housing to accept the stock cable. I would not recommend doing this as the throttle now can be pushed forward and get stuck, not a problem if you know its there but you can't push your weight into the throttle. Building new cables isn't that hard, I'd suggest just doing it the right way 😉
Back to top
IP Logged
Tacopimp
Full Member
Offline
ihatemonix.com
Posts: 100
South Jersey
Gender:
Re: Throttle housing, aftermarket?
Reply #5 -
08/15/19 at 11:46:24
ZSteele wrote
on 08/15/19 at 10:02:42:
I drilled the hole on my aftermarket housing to accept the stock cable. I would not recommend doing this as the throttle now can be pushed forward and get stuck, not a problem if you know its there but you can't push your weight into the throttle. Building new cables isn't that hard, I'd suggest just doing it the right way 😉
I don't know how to go about making my own throttle cable. Wish I did.
Back to top
2000 Savage
IP Logged
ZSteele
Senior Member
Offline
I'll finish it
tomorrow
Posts: 253
Re: Throttle housing, aftermarket?
Reply #6 -
08/15/19 at 12:21:37
Google and youtube are your friends.
Also if you do end up building your own I have a few tips if you don't have all of the proper tools. Hit me up down the line.
Back to top
IP Logged
Tacopimp
Full Member
Offline
ihatemonix.com
Posts: 100
South Jersey
Gender:
Re: Throttle housing, aftermarket?
Reply #7 -
08/15/19 at 12:31:08
ZSteele wrote
on 08/15/19 at 12:21:37:
Google and youtube are your friends.
Also if you do end up building your own I have a few tips if you don't have all of the proper tools. Hit me up down the line.
Haha. I was already youtubing this when you replied. Doesn't seem too difficult. Thank you for making this suggestion to me.
Back to top
2000 Savage
IP Logged
ZSteele
Senior Member
Offline
I'll finish it
tomorrow
Posts: 253
Re: Throttle housing, aftermarket?
Reply #8 -
08/15/19 at 12:59:22
Not at all, just make sure you measure multiple times and check the length with the bars going BOTH directions. Had to do the clutch cable twice because I thought I had them cocked to the longer side. I was wrong.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
04/22/24 at 23:36:13
›
General Category
›
Rubber Side Down!
› Throttle housing, aftermarket?
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.