Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1 2 3 ... 6
Send Topic Print
Modified Pulley Spacer (Read 878 times)
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Modified Pulley Spacer
07/21/19 at 09:04:34
 
Well, here goes.
Using the drawing DBM provided, I just cut down my first spacer. Dave gave me a few, I had one. Bought one.
So, I have 5.
Can cut them all up if there is a demand/need/want.
I'm sure they'll fit in the cheapo Priority box.
So, maybe $25 each, with shipping?
Send your original back.
Any takers?
Should this be in 'Marketlace'?
thanks,
-Armen
Back to top
 

Savage_spacer_Mod.jpg

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28733
L.A. California
Gender: male
Re: Modified Pulley Spacer
Reply #1 - 07/21/19 at 09:52:06
 
Yup, marketplace.

So now you have the light flywheel mod and the rear pulley spacer mod.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1482931385


You need to resize your pic's to between 640x480 to 800x600.
Back to top
 
 
WWW   IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #2 - 07/21/19 at 12:19:16
 
Thanks.
Actually, Dave still has the remaining  stash of flywheels and front pulleys.
I just have the modified rear axle spacer for the double wide bearing.
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
Dave
YaBB Moderator
ModSquad
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 17738
Camp Springs, Kentucky
Gender: male
Re: Modified Pulley Spacer
Reply #3 - 07/22/19 at 03:35:19
 
Yep....I have the remaining lightened flywheels - and this most likely is the last of them to be machined.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1504271719/0

Back to top
 
 

Someday I will be old......But not today!

  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #4 - 07/23/19 at 07:16:36
 
Well, judging by the thunderous response to this offering, I'll prob sell these 5 and quit.
So, the new price is $25 (including postage) without sending me your old one.
thanks,
-Armen
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
Matchless G11
Senior Member
****
Offline

SuzukiSavage.com
Rocks!

Posts: 451
Newfoundland NJ
Re: Modified Pulley Spacer
Reply #5 - 07/23/19 at 15:41:17
 
I hate to be a dumb dumb , but what is this item good for?

I myself would like to gear a savage down. I have a ryca and on the backroads it hovers between 2-3 gears.
Chain gearing would be easy but,

I would like to keep a belt.
So that is the problem.
Back to top
 
 
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #6 - 07/24/19 at 04:25:45
 
Hey Matchless,
If you dig through Dave's posts, you'll see his documentation of the problems in the sprocket carrier. Basically, after a bunch of miles, the carrier develops play (wobble). Dave came up with one solution involving machining the carrier, and installing a shim/bushing. DragBikeMike came up with another solution involving using a double row bearing. To use the wider bearing, the left side spacer must be machined.
So, these spacers are for the bikes using the wider bearing.
Doesn't matter if you are running a belt or chain.
Make sense?
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
Dave
YaBB Moderator
ModSquad
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 17738
Camp Springs, Kentucky
Gender: male
Re: Modified Pulley Spacer
Reply #7 - 07/24/19 at 07:48:18
 
Back to top
 
 

Someday I will be old......But not today!

  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #8 - 07/31/19 at 18:11:43
 
They travel in herds...
Back to top
 

Savage_modified_axle_spacers.jpg

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #9 - 08/20/19 at 20:16:47
 
Bump Smiley
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28733
L.A. California
Gender: male
Re: Modified Pulley Spacer
Reply #10 - 08/20/19 at 20:34:01
 
OUCH!
Back to top
 
 
WWW   IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #11 - 09/17/19 at 05:20:21
 
Bump  Grin
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
ohiomoto
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 2674
WTF is JOG?
Re: Modified Pulley Spacer
Reply #12 - 09/17/19 at 10:14:12
 
PM sent
Back to top
 
 
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #13 - 09/18/19 at 04:43:27
 
Ohio
Cool. LMK where to send it.
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1430

Re: Modified Pulley Spacer
Reply #14 - 09/28/19 at 04:53:45
 
Because of the overwhelming response to the spacers, I now need people to send in the OEM spacer. I have enough to send out, but I'll need more to modify.
So, either send the stocker up front, or send it to me after you install the modified one.
Be the first kid on your block with a non-wobbly pulley!
thanks,
-Armen
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
Pages: 1 2 3 ... 6
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
03/28/24 at 22:07:35



General CategoryThe Marketplace › Modified Pulley Spacer


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.