SuzukiSavage.com - HELP WANTED!!!! Noob on Deck

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › HELP WANTED!!!! Noob on Deck

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

HELP WANTED!!!! Noob on Deck (Read 168 times)

Junker

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 43

Re: HELP WANTED!!!! Noob on Deck
Reply #15 - 07/09/19 at 21:58:37

QUOTE:
@Junker - No not white smoke per se like the blown head gasket or oil leaking into the exhaust. Just a kind of burn off when the engine gets good an hot. Most noticeable at night cause it floats in front of headlight.

Seafoam can produce that kind on smoke.

It could also be oil burning off the motor. Have a look for oil around the nut at the front of the motor next to the header or around the spark plug behind the chrome head covers. It's a common slow leak caused by a leaking plug/cap under the head cover.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1099227295

If it is leaking .. this is the part you will need ..
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1412889755

Enjoy your wrenching! Cool

IP Logged

batman Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 3806 osceola new york Gender:	Re: HELP WANTED!!!! Noob on Deck Reply #16 - 07/11/19 at 13:17:11 What is an OEM rebuild kit? ,I've never seen one, tell us where you found it . If it was online be careful that the jets are the proper size ,that is the same size as the ones you remove, often these "kits" for the Savage aren't.
Back to top	my old work mates called me MacGyver IP Logged

S40_Bandito YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 12 Atlanta, GA Gender:	Re: HELP WANTED!!!! Noob on Deck Reply #17 - 07/12/19 at 08:09:04 Thanks verslagen1 verslagen1 wrote on 07/09/19 at 14:55:00: Quote: 3. Will the air compressor be a 100% necessary for the carb cleaning - only tool I don't have??? You don't need one to clean a carb. A can of carb cleaner and a face shield is all you need.
Back to top	IP Logged

S40_Bandito

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 12
Atlanta, GA
Gender: male

Re: HELP WANTED!!!! Noob on Deck
Reply #18 - 07/15/19 at 12:47:49

@BATMAN

The owner of the old school MC shop ordered it for me. I tried to post a pic but it won't let me so here is the info and a web link.

1003-1386
Carburetor Rebuild Kit

Carb Rebuild Kit Closed Course Racing
Only Suzuki LS650 Savage 96-17

Included Items:
(1) Float chamber gasket

(2) O-rings(assorted sizes)

(1) Jet needle

(1) Pilot screw

(1) Spring

(1) Needle and seat set

(1) Flat washer

(1) E-clip

(4) 5mm-0.80 x 16mm Pan head bolts

(4) 5mm-0.80 x 8mm Pan head bolts

(1) 4mm-0.70 x 6mm Pan head bolt

(1) #52.5 Pilot jet

(1) #145 Main jet

https://www.denniskirk.com/parts-unlimited/carburetor-rebuild-kit-1003-1386.p...

batman wrote on 07/11/19 at 13:17:11:

What is an OEM rebuild kit? ,I've never seen one, tell us where you found it . If it was online be careful that the jets are the proper size ,that is the same size as the ones you remove, often these "kits" for the Savage aren't.

IP Logged

S40_Bandito YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 12 Atlanta, GA Gender:	Re: HELP WANTED!!!! Noob on Deck Reply #19 - 07/15/19 at 13:07:39 I can't make it up if it's already a thing @BrokeAss . It looks a lil naked but not half bad IMO what do you think? Shoutout to @transam4life for posting the MOD http://suzukisavage.com/cgi-bin/YaBB.pl?num=1417758813/4 BrokeAss wrote on 07/09/19 at 19:30:10: Batwing fairing on an S40? Please tell me you're joking...
Back to top	IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home