SuzukiSavage.com - Wiseco pistons

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Wiseco pistons

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Wiseco pistons (Read 61 times)

DennisB YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 1	Wiseco pistons 03/18/19 at 05:51:17 I seem to be having a hard time finding a stock 1mm over piston for my wife's 86 savage. I've read that the dr650 piston works. Just want to be sure before I buy one that is a 90-95 dr650 that interchanges. I need to go to 95 or 96mm. The bore size is currently a very loose std bore.
Back to top	IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 17784
Camp Springs, Kentucky
Gender: male

Re: Wiseco pistons
Reply #1 - 03/18/19 at 06:43:53

Our forum member source for the pistons is Lancer, and he has 94, 95, 96 & 97mm available:
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1338581006

Here is one of his eBay listings:
https://www.ebay.com/itm/95mm-Wiseco-High-Compression-Pistons/123557650314

The pistons were made for the DR650 originally.....luckily they happen to fit our bike as well. I don't know the specific part numbers for each piston.

The scariest part of this would be finding a place that can bore your cylinder and to it right....they only get one chance at boring it properly. Too tight and it could seize - too loose and you are starting with a worn out cylinder.

Someday I will be old......But not today!

IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10586
Oklahoma
Gender: male

Re: Wiseco pistons
Reply #2 - 03/19/19 at 09:45:05

I have all of the pistons in stock, from 94mm up to 97mm.
$199 each with free shp. for all US addresses.
International is more.

Dave is absolutely correct about the machine shop that bores an air cooled cylinder for a Wiseco High Compression Piston. They MUST know what they are doing. If you want to bore your cylinder larger you need to find a shop that dies this work frequently.

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home