SuzukiSavage.com - Speedometer swap LED Indicators.. Resistors?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Speedometer swap LED Indicators.. Resistors?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Speedometer swap LED Indicators.. Resistors? (Read 59 times)

Witchdoctor YaBB Newbies Offline Ridin out to sunset.. Posts: 37 CENTRAL FLORIDA	Speedometer swap LED Indicators.. Resistors? 11/15/18 at 12:52:36 Greetings I'm thinking of using a speedometer with the turn signal, neutral, and high beam indicators built in..and they are all LED. Do I need resistors?.. I avoided LED blinkers because I didn't want to mess with anything (resistors or pre-made crap and a new relay) and proper incandescent blinkers look much softer anyways.
Back to top	USA Central Florida Abused 2011 s40 19k miles K&N Filter/jets Exhaust drilled out IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18099 Camp Springs, Kentucky Gender:	Re: Speedometer swap LED Indicators.. Resistors? Reply #1 - 11/15/18 at 16:13:38 Nope......the small bulbs have no affect on the flasher........they will be fine in either filament or LED.
Back to top	Someday I will be old......But not today! IP Logged

ohiomoto Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2772	Re: Speedometer swap LED Indicators.. Resistors? Reply #2 - 11/15/18 at 20:29:37 I have one and Dave is correct.
Back to top	IP Logged

Witchdoctor YaBB Newbies Offline Ridin out to sunset.. Posts: 37 CENTRAL FLORIDA	Re: Speedometer swap LED Indicators.. Resistors? Reply #3 - 11/16/18 at 10:02:39 REALLY appreciate the quick help Dave!! Glad to get rid of my stock tank mounted speedometer!
Back to top	USA Central Florida Abused 2011 s40 19k miles K&N Filter/jets Exhaust drilled out IP Logged

Witchdoctor

YaBB Newbies

Offline

Ridin out to
sunset..

Posts: 37
CENTRAL FLORIDA

Re: Speedometer swap LED Indicators.. Resistors?
Reply #4 - 11/24/18 at 14:53:21

Just an update. Speedometer came with good instructions that were not in chinglish. The LED indicators work fine but I did need two diodes for the blinker indicator. One on each positive lead going from the blinkers to the speedo. Works great.. I would show off the bike a bit but for some reason I can get any pics to post on this forum anymore. Cheesy

USA
Central Florida
Abused 2011 s40 19k miles
K&N Filter/jets
Exhaust drilled out

IP Logged

GOF Full Member Offline SuzukiSavage.com Rocks! Posts: 216 Buffalo, NY	Re: Speedometer swap LED Indicators.. Resistors? Reply #5 - 11/24/18 at 15:25:48 How accurate is the new speedo? What have you done with the hole in the tank?
Back to top	1988 Suzuki Savage 1987 Yamaha TW200 IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home