Donate!
Welcome, Guest. Please Login or Register :: View Members
SuzukiSavage.com › General Category › Rubber Side Down! › Correct position of plate?
(Moderators: verslagen1, Dave, Serowbot) ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Correct position of plate? (Read 46 times)
Drifter..
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 15
Correct position of plate?
11/02/18 at 12:30:18  
What is the correct position of the plate that holds the needle in place in the slide?  Both holes open or both partially blocked or one blocked?  Some one was in this carb before me so i do not know what is right and the hayes manual has a blurry pic so i cant see the correct position.   Thanks in advance!
Back to top
 
 
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Correct position of plate?
Reply #1 - 11/02/18 at 12:56:45  
The plate is correctly located when it's equidistant between my fork and my knife.
Back to top
 
 
The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28838
L.A. California
Gender: male
Re: Correct position of plate?
Reply #2 - 11/02/18 at 12:59:45  
Both holes (in the slide) open.
Align the slots (in the plate) with the holes.
Back to top
 
 
Versey's Place
Tech Section Index
WWW   IP Logged
Drifter..
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 15
Re: Correct position of plate?
Reply #3 - 11/02/18 at 15:04:11  
Thanks, that is where i put it both holes open!

There is always one.....guy in every crowd!   Wink
Back to top
 
 
  IP Logged
justin_o_guy2
Serious Thumper
*****
Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.
Re: Correct position of plate?
Reply #4 - 11/02/18 at 15:40:12  
EVEN if the
Crowd is two.
Back to top
 
 
The people never give up their liberties but under some delusion.- Edmund Burke.
  IP Logged
batman
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 3806
osceola new york
Gender: male
Re: Correct position of plate?
Reply #5 - 11/02/18 at 21:26:39  
There is a small dimple in the plate close to the jet needle .it must protrude downward or the plate is upside down.
Back to top
 
 
my old work mates called me MacGyver
  IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›


« Home

 
« Home
SuzukiSavage.com
06/28/24 at 03:19:13



› General Category › Rubber Side Down! › Correct position of plate?


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.