SuzukiSavage.com - Turn signals

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Turn signals

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Turn signals (Read 53 times)

Mike Austin YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 13	Turn signals 10/17/18 at 20:28:13 I see turn signals that stay lit until made to flash, how do you do this, Thanks!
Back to top	IP Logged

batman Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 3806 osceola new york Gender:	Re: Turn signals Reply #1 - 10/17/18 at 20:45:21 If your talking about the front turn signals, their double filament bulbs ,(three wire ,run,- (on always) , turn,and ground) one filament for running lights , the other for turn signals . The rear are single filament for turn only (two wire, - turn and ground).
Back to top	my old work mates called me MacGyver IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18105 Camp Springs, Kentucky Gender:	Re: Turn signals Reply #2 - 10/18/18 at 05:26:37 You can buy control modules that will turn the rear turn signals into running lights, brake lights and flash as turn signals. The model I used on my Ninja Cafe’ bike was about $80. If you are using the rear turn signals as running and brake lights - they are required to have red lenses.
Back to top	Someday I will be old......But not today! IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home