SuzukiSavage.com - Adjusting the shift lever

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Adjusting the shift lever

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Adjusting the shift lever (Read 40 times)

JAGGUY

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 27
Riverside Ca.

Adjusting the shift lever
07/12/18 at 16:19:35

Seems I need to wear sneakers to get my big fat foot under the shift lever and most of the time boots would be more appropriate.
I'm sure I can move the lever one spline over but that might be too much.
It's hard to tell for me looking at the linkage but is the linkage adjustable by loosening both end nuts and turning the shaft like a turnbuckle?

2009 S40 Raptor, Dyna 52.5, 152, 2 spacers

Socialism is like a Jedi mind trick...it only works on the weak minded.

IP Logged

batman Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 3806 osceola new york Gender:	Re: Adjusting the shift lever Reply #1 - 07/12/18 at 16:59:18 Yes loosen the locking nuts on both ends ,one is right and the other left handed.then turn the shaft to adjust the pedal. There is an adjustment for the brake pedal also, it a screw on the back of the mount plate.
Back to top	my old work mates called me MacGyver IP Logged

JAGGUY YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 27 Riverside Ca.	Re: Adjusting the shift lever Reply #2 - 07/12/18 at 17:48:44 Thank you, just what I was looking for.
Back to top	2009 S40 Raptor, Dyna 52.5, 152, 2 spacers Socialism is like a Jedi mind trick...it only works on the weak minded. IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home