SuzukiSavage.com - swing arm bearings

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › swing arm bearings

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

swing arm bearings (Read 25 times)

John E Black YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 39	swing arm bearings 06/13/18 at 09:45:27 Howdy...removing swing arm for painting and wondering if I really need the "special tool" for removing the bearings, etc., as the manual states? Or is there a simpler method.. Thanks in advance...! johnny
Back to top	IP Logged

Gary_in_NJ Serious Thumper Offline LS650 Cafe Racer Posts: 2625 Amongst the Twisty Roads	Re: swing arm bearings Reply #1 - 06/13/18 at 10:26:16 There aren't any bearings in the swing arm. There are needle bearings installed in the frame which the bolt passes through, make sure they are in good condition and well lubed before reassembly.
Back to top	A life-time student of motorcycling. LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home