SuzukiSavage.com - Custom parts for Savage

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 4

Custom parts for Savage
05/08/18 at 05:15:04

Hello!

First of all, I am completely new to this forum of yours and I apologize if I post to wrong section.

During the coming weeks I will buy my very own Suzuki Savage (-94) and I would like to customize it a bit more. It already has handmade forward controls (I am quite tall) and Raask exhaust.

After googling around I found this pic posted by Kenny G, the handlebar and seat look absolutely stunning.

I would have sent directly a private message to Kenny but within the limit of 10 posts I can't. (Is it possible to tag an user?)

To the question, where from are these parts bought and does installing them require a lot of work? Could someone give a link?

I also found this pic where Bonneville's seat is put on a savage, looks stunning as well. I guess Bonneville's seat doesn't fit directly and on that pic it isn't mounted. Again, does it require a lot of work to mount it?

Much appreciated.

Back to top

IP Logged

HamTemptation YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 4	Re: Custom parts for Savage Reply #1 - 05/08/18 at 05:15:48 I couldn't add links with 0 posts... First one: Second one:
Back to top	« Last Edit: 05/08/18 at 07:03:04 by verslagen1 » IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28857 Tucson Az Gender:	Re: Custom parts for Savage Reply #2 - 05/08/18 at 14:42:13 Kenny?... Where's Kenny?... Looks like Kenny's might just be a modified stock one-piece seat. Extra padding and recover... Looks nice, Kenny...
Back to top	Ludicrous Speed !... ... ... IP Logged

IslandRoad

Serious Thumper

Offline

It doesn't vibrate,
it purrs!

Posts: 1147
The Kiewa Valley, Australia
Gender: male

Re: Custom parts for Savage
Reply #3 - 05/09/18 at 02:52:22

When it comes to the seat, there is only one after-market seat available. It's by Corbin. It looks great but it doesn't fix the problem most people have with the seat - wanting to move back a little.

You generally have three options: (1) Carve the foam and put the cover back on. (2) Modify the stock seat pan (you can move the rectifier from under the seat, and cut the bumps out of the pan, then reshape the foam) or, (3) by a seat off another bike (like a triumph) and modify it to fit.

I personally found option 2 to give the best 'bang for buck'. You can reuse the original seat cover if you don't change the shape of the foam too much. In the end, I got a cover made for $150AUD.

Back to top

S40, 2014, Dyna, Raptor, 52.5/152.5, spacer mod, sea level, cat-eye LED tail light, bullet style halogen turn signals, 'Superbars' with custom 40mm risers, modified stock seat, Metzeler tyres.

IP Logged

HamTemptation

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 4

Re: Custom parts for Savage
Reply #4 - 05/11/18 at 03:18:43

Thanks for the answer!
I think I will go with the option 3. I found one more pic where Triumph seat is installed with aluminium angles. I got all the materials needed for that and it looks very good imo.

Along with the seat I would like to change the stock buckhorn handlebar to a drag bar.

Would this one fit?
https://shop.rycamotors.com/superbar_handlebars_for_harley_davidson.html

EDIT two more:
https://shop.rycamotors.com/drag_bars_02.html
https://shop.rycamotors.com/superbars.html

Are higher risers needed for these? Huh

Back to top

IP Logged

Eegore Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 8589	Re: Custom parts for Savage Reply #5 - 05/11/18 at 03:52:40 All of those bars fit without risers. The standard drag bars get real close to the tank. They don't touch by normal force but if you kick the bike over the bar will leave a mark on the tank from impact on the ground.
Back to top	IP Logged

IslandRoad

Serious Thumper

Offline

It doesn't vibrate,
it purrs!

Posts: 1147
The Kiewa Valley, Australia
Gender: male

Re: Custom parts for Savage
Reply #6 - 05/11/18 at 04:10:19

HamTemptation wrote on 05/11/18 at 03:18:43:

Thanks for the answer!
I think I will go with the option 3. I found one more pic where Triumph seat is installed with aluminium angles. I got all the materials needed for that and it looks very good imo.

http://suzukisavage.com/yabb2.2/Attachments/seat_mod_7_004.jpg

Along with the seat I would like to change the stock buckhorn handlebar to a drag bar.

Would this one fit?
https://shop.rycamotors.com/superbar_handlebars_for_harley_davidson.html

EDIT two more:
https://shop.rycamotors.com/drag_bars_02.html
https://shop.rycamotors.com/superbars.html

Are higher risers needed for these? Huh

That's a real nice seat! ... but they gotta do something about that muffler !!! Wink

Back to top

S40, 2014, Dyna, Raptor, 52.5/152.5, spacer mod, sea level, cat-eye LED tail light, bullet style halogen turn signals, 'Superbars' with custom 40mm risers, modified stock seat, Metzeler tyres.

IP Logged