batman wrote on 05/03/18 at 23:25:57:B.O.A.T.=break out another thousand!
The smaller the boat the more you'll use it ,and less time and money you'll spend maintaining it -which gives you more money and time to use it.(see how that works?) If you boat is sea worthy, why go bigger unless you intend to live on it.
there are lots of old wooden, and metal hulled boats around but few fiberglass ones ,Why? because once you damage the thin layer of gel coat ,water moves through the fiberglass (which is not waterproof ) and attacks the frameing (wood that rots and can't be seen )and the boat twists and warps and is then bonfire material .If your looking at a boat made of this stuff take a long metal straight edge with you to run over the surfaces looking for any warpage .If you find any , it's time to turn on your heel and run like hell.
Well I am sure you might find some folks in disagreement with your views on fiberglass....
Hatteras uses it, as does Grand Banks, and lots of other high end builders.
This baby of mine is a dinosaur, as far as glass, it was made by Bill Trent, who started Glasspar, which had a major share of the boating market in its heydays.
My gal is a 1959 Seafair, original gel coat, etc.....
Only thing I've changed is the wood, that didn't last.
I have a new deck on her, and transom, both wood.
The stringers are as sturdy and as strong as the day she was made, they are encased in fiberglass.
This was all hand laid fiberglass construction of heavy matting, she is tough, and her downwestern flared bow can really take head seas, dry!
BTW, the Break out another grand is for folks who have no desire, or knowledge, to do it themselves.
I enjoy working on my stuff, from remodeling my house, to rebuilding my boat.
I rewired her, new fuel tank, upholstery, etc. Even bought a non running Suzuki DT85 and fixed her to where she starts with just a turn of the key, no cranking, etc.
A 4000 dollar motor, for 500 bucks.
You can do this frugally too, and it doubles your fun