SuzukiSavage.com - Any idea what they are?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Any idea what they are?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Any idea what they are? (Read 110 times)

SoC

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 505
New Jersey
Gender: male

Any idea what they are?
01/29/18 at 20:30:06

So I bought the bike from the "looking for donor thread". I am in process of taking it apart and doing mock up of mods for my other Savage on it. Today I removed the rear turn signals which were both broken off, and attached to one of them with cable ties and a wrap of tape wrap were 4 brackets of some sort. Of the 4, 3 are the same and one is different. Picture shows them. Don't have a clue of what they are or where they came from. Turn signals were still attached to bike though dangling and connected. These were taped to them. The hole drilled in the larger one looks to have been done later. They appear to basically be 1/8" aluminum flat stock.

IMG_2068.JPG

IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10668 Oklahoma Gender:	Re: Any idea what they are? Reply #1 - 01/29/18 at 22:37:04 Maybe used for attaching a muffler to the muffler bracket.
Back to top	IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18101 Camp Springs, Kentucky Gender:	Re: Any idea what they are? Reply #2 - 01/30/18 at 03:03:32 I don't recognize these as a Suzuki Savage part.
Back to top	Someday I will be old......But not today! IP Logged

IslandRoad Serious Thumper Offline It doesn't vibrate, it purrs! Posts: 1147 The Kiewa Valley, Australia Gender:	Re: Any idea what they are? Reply #3 - 01/30/18 at 03:05:28 They look to me like the kind of thing you'd use to relocate the bolts on something, like the license plate perhaps.
Back to top	S40, 2014, Dyna, Raptor, 52.5/152.5, spacer mod, sea level, cat-eye LED tail light, bullet style halogen turn signals, 'Superbars' with custom 40mm risers, modified stock seat, Metzeler tyres. IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10668 Oklahoma Gender:	Re: Any idea what they are? Reply #4 - 01/30/18 at 07:35:31 I've cut and drilled pieces like these a lot of times to bolt up a replacement muffler. How long are these ?
Back to top	IP Logged