SuzukiSavage.com - Suzuki Boulevard S40

SAYA YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Suzuki Boulevard S40 09/08/17 at 10:35:40 hi, I am having Suzuki boulevard S40 Model 2009. Can you please confirm what is the guage / thread size of the oil drain plug? Is it M12 x 1.25 or M14 x 1.5!or what?? Part number of Drain bolt is 09247-14026... Anybody??
Back to top	IP Logged

stewmills Serious Thumper Offline Imagination is more important than knowledge Posts: 2626 Auburn, AL Gender:	Re: Suzuki Boulevard S40 Reply #1 - 09/08/17 at 14:14:37 Looking at DennisKirk, it says Dimensions: Thread Size: 14 x 1.25mm Thread Length: 1/2 in. Installed Length with Magnet: .61 in. Hex Size: 14mm
Back to top	2008 \| 152/52.5–Air Mix 3/4 \| RT6 w/Redline \| Seat Lift w/Sheepskin \| Speedo Rattle \| Rear Pulley Shim \| 140/90-15 Rear \| Kaw Front Pulley \| Relocated Rear Signals FREEDOM ISN'T FREE! IP Logged

SAYA YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Re: Suzuki Boulevard S40 Reply #2 - 09/08/17 at 19:27:52 Thank you very much brother
Back to top	IP Logged

SAYA YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Re: Suzuki Boulevard S40 Reply #3 - 09/11/17 at 21:01:28 Hi Stewmills, I would like to clarify that is 1.25 the spacing between threads? and secondly if the length of bolt with magent is 0.3 inch is that also okay? regards, Shahid
Back to top	IP Logged

piedmontbuckeye Senior Member Offline Go Bucks! Posts: 496 Easley, SC Gender:	Re: Suzuki Boulevard S40 Reply #4 - 09/12/17 at 13:17:27 stewmills wrote on 09/08/17 at 14:14:37: Looking at DennisKirk, it says Dimensions: Thread Size: 14 x 1.25mm Thread Length: 1/2 in. Installed Length with Magnet: .61 in. Hex Size: 14mm I never measured mine, but I doubt that the head size AND the body size are both 14mm.
Back to top	"The difference between death and taxes is that death doesn't change every time congress meets." - Will Rogers IP Logged

stewmills

Serious Thumper

Offline

Imagination is more
important than
knowledge

Posts: 2626
Auburn, AL
Gender: male

Re: Suzuki Boulevard S40
Reply #5 - 09/12/17 at 14:50:04

Yeah, that's just what the website says. I didn't measure mine, but IIRC my head size is 14mm, taking a 14mm socket wrench to remove. I have a thread gauge, but can't afford to remove my plug and lose all the oil to measure the thread size. Sorry.

I think their website reference may be wrong as other references I now see indicate a M12 x 1.25 thread with 14mm hex head, 20mm thread length.

Back to top

IP Logged

piedmontbuckeye

Senior Member

Offline

Go Bucks!

Posts: 496
Easley, SC
Gender: male

Re: Suzuki Boulevard S40
Reply #6 - 09/12/17 at 15:06:44

stewmills wrote on 09/12/17 at 14:50:04:

Yeah, that's just what the website says. I didn't measure mine, but IIRC my head size is 14mm, taking a 14mm socket wrench to remove. I have a thread gauge, but can't afford to remove my plug and lose all the oil to measure the thread size. Sorry.

I think their website reference may be wrong as other references I now see indicate a M12 x 1.25 thread with 14mm hex head, 20mm thread length.

That sounds more like it!

Back to top

"The difference between death and taxes is that death doesn't change every time congress meets." - Will Rogers

IP Logged