Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Mystery M6 x 1.0 x 1" bolt
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
3
Mystery M6 x 1.0 x 1" bolt (Read 348 times)
stewmills
Serious Thumper
Offline
Imagination is more
important than
knowledge
Posts: 2641
Auburn, AL
Gender:
Re: Mystery M6 x 1.0 x 1" bolt
Reply #30 -
08/02/17 at 06:48:52
batman wrote
on 08/01/17 at 20:41:49:
!I'm glad you didn't find a nail you would be inspecting your whole house to see if one was missing!
Oh...but I bet I would find it
Back to top
2008 | 152/52.5–Air Mix 3/4 | Rotella T4 | Seat Lift w/Sheepskin | Speedo Rattle | Rear Pulley Shim | 140/90-15 Rear | Kaw Front Pulley | Relocated Rear Signals
FREEDOM ISN'T FREE!
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Mystery M6 x 1.0 x 1" bolt
Reply #31 -
08/02/17 at 06:59:32
Some strategically placed oil on the engine and ground, another bolt or two and Stew would be Stewing in his own juices.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
Dave
YaBB Moderator
ModSquad
Offline
SuzukiSavage.com
Rocks!
Posts: 18101
Camp Springs, Kentucky
Gender:
Re: Mystery M6 x 1.0 x 1" bolt
Reply #32 -
08/02/17 at 07:39:31
Put some green antifreeze under the Savage.......that'll get them wondering!
Back to top
Someday I will be old......But not today!
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Mystery M6 x 1.0 x 1" bolt
Reply #33 -
08/02/17 at 07:46:17
That's devious enough to get me to appreciate it.
How about taking a roofing nail and scuff the head up good, cut it off and super glue it on the front tire?
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
DavidV
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 16
Re: Mystery M6 x 1.0 x 1" bolt
Reply #34 -
08/04/17 at 06:47:01
What about one of the bolts on the inside of the rear belt pulley? They hold the ring on the back side of the pulley. mine have the recessed head like you show. Just a thought and there are quite a few of them.
Back to top
IP Logged
Dave
YaBB Moderator
ModSquad
Offline
SuzukiSavage.com
Rocks!
Posts: 18101
Camp Springs, Kentucky
Gender:
Re: Mystery M6 x 1.0 x 1" bolt
Reply #35 -
08/04/17 at 07:20:09
DavidV wrote
on 08/04/17 at 06:47:01:
What about one of the bolts on the inside of the rear belt pulley? They hold the ring on the back side of the pulley. mine have the recessed head like you show. Just a thought and there are quite a few of them.
Those bolts are very short....not 1 inch long.
Back to top
Someday I will be old......But not today!
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Mystery M6 x 1.0 x 1" bolt
Reply #36 -
08/04/17 at 07:27:28
I've found bolts in the road when I rode my ten speed hours a week. I never found a bolt, then a car in pieces down the road. No rattles, no leaks, no biggie.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
stewmills
Serious Thumper
Offline
Imagination is more
important than
knowledge
Posts: 2641
Auburn, AL
Gender:
Re: Mystery M6 x 1.0 x 1" bolt
Reply #37 -
08/04/17 at 07:38:48
This is what I think I should expect in a few more days...
Back to top
Nuts_and_bolts_trail_animated.gif
2008 | 152/52.5–Air Mix 3/4 | Rotella T4 | Seat Lift w/Sheepskin | Speedo Rattle | Rear Pulley Shim | 140/90-15 Rear | Kaw Front Pulley | Relocated Rear Signals
FREEDOM ISN'T FREE!
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Mystery M6 x 1.0 x 1" bolt
Reply #38 -
08/04/17 at 08:14:47
Feel up under the fender.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Mystery M6 x 1.0 x 1" bolt
Reply #39 -
08/08/17 at 16:17:31
Did you figure it out?
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
stewmills
Serious Thumper
Offline
Imagination is more
important than
knowledge
Posts: 2641
Auburn, AL
Gender:
Re: Mystery M6 x 1.0 x 1" bolt
Reply #40 -
08/08/17 at 20:01:25
Nope. Had to be a stray bolt. Both bikes check out.
Back to top
2008 | 152/52.5–Air Mix 3/4 | Rotella T4 | Seat Lift w/Sheepskin | Speedo Rattle | Rear Pulley Shim | 140/90-15 Rear | Kaw Front Pulley | Relocated Rear Signals
FREEDOM ISN'T FREE!
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Mystery M6 x 1.0 x 1" bolt
Reply #41 -
08/08/17 at 20:33:31
. you should have it neutered.
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
Pages:
1
2
3
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
10/02/24 at 11:23:27
›
General Category
›
Rubber Side Down!
› Mystery M6 x 1.0 x 1" bolt
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.