SuzukiSavage.com - 7/8" bar end mirrors on 1" bars?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › 7/8" bar end mirrors on 1" bars?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

7/8" bar end mirrors on 1" bars? (Read 98 times)

Collinjet YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	7/8" bar end mirrors on 1" bars? 07/28/17 at 12:45:30 Does anyone have an Idea how I could get 7/8" bar end mirrors to attach to the stock 1" bars? Im thinking about drilling a 7/8" hole in the weights and trimming the extra 1/2 inch of the bar off the end. Thoughts??
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28889
L.A. California
Gender: male

Re: 7/8" bar end mirrors on 1" bars?
Reply #1 - 07/28/17 at 13:42:54

If you could live with the extra narrow bars... sounds like a plan.
To get the holes in the center, I would make spacers to fit the bars and whatever drills you plan on using.
But then you could just make the spacers and leave them in, drill if you need to make it deeper.
Get somebody to put a couple of tack welds keep them in place.

Versey's Place
Tech Section Index

IP Logged

Gary_in_NJ Serious Thumper Offline LS650 Cafe Racer Posts: 2633 Amongst the Twisty Roads	Re: 7/8" bar end mirrors on 1" bars? Reply #2 - 07/28/17 at 19:32:32 Wrap the bar end mirror in a piece of inner tube.. that will keep it tight and cut down on vibration.
Back to top	A life-time student of motorcycling. LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG IP Logged

gizzo Serious Thumper Offline SuzukiCabbage. It's Savage. Posts: 1318 Australia	Re: 7/8" bar end mirrors on 1" bars? Reply #3 - 07/30/17 at 16:28:30 ^ that or a bunch of duct tape
Back to top	IP Logged

Collinjet YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Re: 7/8" bar end mirrors on 1" bars? Reply #4 - 08/02/17 at 20:20:29 Does anyone know how long the bar weights are?
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28889 L.A. California Gender:	Re: 7/8" bar end mirrors on 1" bars? Reply #5 - 08/02/17 at 22:38:34 over 4" if you take the grip off, you'll see 2 divots where it's welded to the bar.
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home