Eegore wrote on 07/12/17 at 19:08:13: I need to get turn signal mounts and according to the recent thread Im going to have to take them apart some to put on new mounts.
Or you can leave the front wheel alone and just pop off the top triple clamp/yoke. The fork caps do have the pre-load spring tension on them...so be aware that they are going to want to fly off when you unscrew them. Also be aware you need to support the bike on a jack as you take the fork caps off.....as the springs are what is holding the bike up (if you don't support the bike and take a cap off...the bike will drop - however the kick stand won't get shorter so the bike will suddenly fall over onto the right side).
Straightening the twist in forks is a common thing in the dirt bike worlds, as you can fall down a lot when you are learning. Loosen the clamping bolts on the bottom yoke, stand at the front of the bike with the front wheel between your legs, and your hands on the handlebars.....and twist the bars the direction you want them to go. Repeat as necessary until you get them straight...then tighten the yoke bolts.