Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Newby with a 'special' S40
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
3
Newby with a 'special' S40 (Read 362 times)
batman
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 3806
osceola new york
Gender:
Re: Newby with a 'special' S40
Reply #30 -
07/06/17 at 14:30:23
Acidrich , the carb is tuned lean from the factory, and runs leaner from about 1000 ft down to sea level. using an after market filter sends it leaner yet. You should probable rejet if you pipes bluing badly,and maybe adjust your mixture screw first.and do the spacer mod,( It's in the tech. section) then maybe up a size or two on the main jet ?
Back to top
my old work mates called me MacGyver
IP Logged
Acidrich
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 21
Re: Newby with a 'special' S40
Reply #31 -
07/06/17 at 15:17:50
batman wrote
on 07/06/17 at 14:30:23:
Acidrich , the carb is tuned lean from the factory, and runs leaner from about 1000 ft down to sea level. using an after market filter sends it leaner yet. You should probable rejet if you pipes bluing badly,and maybe adjust your mixture screw first.and do the spacer mod,( It's in the tech. section) then maybe up a size or two on the main jet ?
Cheers Mr Batman,
It's going on it's first long run tomorrow from Birmingham to sunny Cleethorpes in Lincolnshire. I'm fully expecting something to go wrong but fingers crossed.....
I've oiled the filter and made an aluminium surround to choke it off a bit so that may help.
There's a slight wisp of smoke when stationary from somewhere above the head so I've re torqued the head bolts but can't see any oil.....?
I'll be asking a few more questions no doubt but thanks for all the info.
Back to top
IP Logged
batman
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 3806
osceola new york
Gender:
Re: Newby with a 'special' S40
Reply #32 -
07/06/17 at 20:24:50
Sorry can't tell much from your pic. Smoke -breather hose off the top of the head? / the bolt in place that held the front of the chrome head cover on the left side?(just in front of the compression release) it also holds the head cover down ,it needs to be there.Could also be the rubber headplug leak ,in the top of the cavity next to the exhaust header. It could be the two head bolts dead center front and back that go from the head down to the cylinder, they have been known to weep ,that can usually be cured with a bit of RTV and a retorque. Just keep an eye on your oil level ,and enjoy the ride!
Back to top
my old work mates called me MacGyver
IP Logged
Pages:
1
2
3
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
10/02/24 at 07:28:12
›
General Category
›
Rubber Side Down!
› Newby with a 'special' S40
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.