Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Adjusting stock carb with modified engine
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
3
4
Adjusting stock carb with modified engine (Read 417 times)
kojones
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 223
Finland
Re: Adjusting stock carb with modified engine
Reply #45 -
06/28/17 at 04:45:37
New carb was in much better condition overall, diaphgrams like new. Excellent. Put in 52,5 and 165 and lifted the needle one slot, pilot jet is still rich, highest idle at screw 1/4 turns out. Main jet is a bit too small, few runs showed slight increase in power after WOT. Runs much better now, old carb had slightly torn diaphgram and also found out that my vacuum plug had developed a hole in it
Thanks to you all for your replies, seems like the correct size for the pilot jet is surprisingly small and surprisingly large for the main jet.
Back to top
IP Logged
savageguy1
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 90
Re: Adjusting stock carb with modified engine
Reply #46 -
06/28/17 at 16:49:56
Ruttly wrote
on 06/12/17 at 10:17:23:
You put all that money in the engine , if you want easy tuning and real good throttle response you should sell the stock carb and buy the mikuni vm36 kit from Lancer here in the Market Place. You will not be disappointed. Trust me on this one you will thank me later !
or ( not to take away from lancer) just but a one off ebay and buy the parts you need to make it work I believe it is cheaper . the parts are list on the forum under ENGINE: MORE POWER.
Back to top
IP Logged
kojones
Full Member
Offline
SuzukiSavage.com
Rocks!
Posts: 223
Finland
Re: Adjusting stock carb with modified engine
Reply #47 -
06/29/17 at 05:00:37
savageguy1 wrote
on 06/28/17 at 16:49:56:
Ruttly wrote
on 06/12/17 at 10:17:23:
You put all that money in the engine , if you want easy tuning and real good throttle response you should sell the stock carb and buy the mikuni vm36 kit from Lancer here in the Market Place. You will not be disappointed. Trust me on this one you will thank me later !
or ( not to take away from lancer) just but a one off ebay and buy the parts you need to make it work I believe it is cheaper . the parts are list on the forum under ENGINE: MORE POWER.
This was my plan, the winter is long so lots of time to find correct parts and adjust the carb. I'm too cheap to buy a kit
.
I put the old idle mixture screw in as it has different needle profile than the new one, 1-3/4 turns out resulted highest idle, so it's all fine now.
Holiday starts tomorrow, so lots of testing in sight
Back to top
IP Logged
justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
Re: Adjusting stock carb with modified engine
Reply #48 -
06/29/17 at 06:05:36
What holiday is it?
Back to top
The people never give up their liberties but under some delusion.- Edmund Burke.
IP Logged
Dave
YaBB Moderator
ModSquad
Offline
SuzukiSavage.com
Rocks!
Posts: 18101
Camp Springs, Kentucky
Gender:
Re: Adjusting stock carb with modified engine
Reply #49 -
06/29/17 at 06:21:22
Do they celebrate the 4th of July in Finland?
Back to top
Someday I will be old......But not today!
IP Logged
Pages:
1
2
3
4
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
10/02/24 at 07:18:27
›
General Category
›
Rubber Side Down!
› Adjusting stock carb with modified engine
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.