Donate!
Welcome, Guest. Please Login or Register :: View Members
SuzukiSavage.com › General Category › Rubber Side Down! › Clearances inside the clutch cover
(Moderators: verslagen1, Dave, Serowbot) ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Clearances inside the clutch cover (Read 36 times)
kojones
Full Member
***
Offline

SuzukiSavage.com
Rocks!

Posts: 223
Finland
Clearances inside the clutch cover
05/01/17 at 09:36:19  
I have some marks inside my Savages clutch cover, seems like the tensioner is hitting the cover and making noise, too.

Measured 11mm from the gasket surface to the marks. https://www.dropbox.com/s/z35l1jgbhddlgtk/2017-05-01%2017.57.08.jpg?dl=0
https://www.dropbox.com/s/ti613aal54fbs5j/2017-05-01%2017.41.10.jpg?dl=0

Similar experiences or anybody has a cover that could be measured?
Back to top
 
 
  IP Logged
kojones
Full Member
***
Offline

SuzukiSavage.com
Rocks!

Posts: 223
Finland
Re: Clearances inside the clutch cover
Reply #1 - 05/01/17 at 11:08:24  
Just asking this because my cover has been welded and I don't know if it's been modified more shallow, would really appreciate if someone who has a cover could measure the clearance between the gasket surface and the oil passages behind the filter.

If it's the cover causing the hitting, I'll buy a used one. If it's not, then I guess I have to bent the chain guide or something.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›


« Home

 
« Home
SuzukiSavage.com
10/01/24 at 21:30:49



› General Category › Rubber Side Down! › Clearances inside the clutch cover


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.