Dave
YaBB Moderator ModSquad
Offline
SuzukiSavage.com Rocks!
Posts: 18099
Camp Springs, Kentucky
Gender:
|
It depends a bit on the elevation you ride at......with the stock air cleaner and a DYNA or stock muffler, a #150 main, and a #50 or 52.5 pilot works well....with 3 number 4 machine screw washers on the needle in place of the stock white spacer. (If you still have a lean surge at low throttle settings, remove 1 of the washers and try just 2). Higher elevations require smaller jets.....but until you get up over 4,000 feet I am not sure you need to change much.
With the cone filter folks tend to need a bit larger jets....I would start with a #152.5 main, #52.5 pilot, and 2 washers (unless you are over 4,000 feet msl). Each bike is different.....but obviously you are running lean with what you have right now.
|