Redryder652
Full Member
Offline
SuzukiSavage.com Rocks!
Posts: 179
Bergen County, New jersey
Gender:
|
So I made a new pipe for my s40 and it is about 1 3/4 I.d. to about 4 inches past the axle. It is basically straight except for 2 washers inside to take a bit of bite off the tone.
I'm running a 155 main, 55 pilot, one metal washer on the needle, and probably 2 1/2 to 3 turns out on the screw.
Here's my issue, around town is fine, or slow speeds is fine, but at highway cruising if I give her a fair amount of throttle, she pulls good, I let off a little, give her gas again, and it's like a tiny bit of hesitation. I understand a stock savage won't run good with a straight pipe, hence the washers inside. Should I put more baffling in there or play with the jets?
|