SuzukiSavage.com - 1.25" Handlebars

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › 1.25" Handlebars

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

1.25" Handlebars (Read 64 times)

Arty Dodger YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 48 Shreveport, LA Gender:	1.25" Handlebars 12/22/16 at 20:53:18 Has anyone had any experience fitting a 1.25" handlebar on the Savage? Is it possible? I realize I'd need new risers to fit. But is there anything else that wouldn't make it work?
Back to top	2007 Suzuki Savage to Bob or Die! IP Logged

hotrod Senior Member Offline SuzukiSavage.com Rocks! Posts: 326 NC Gender:	Re: 1.25" Handlebars Reply #1 - 12/22/16 at 21:40:45 WHY ? There is so much out there in 1 inch.
Back to top	IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18101 Camp Springs, Kentucky Gender:	Re: 1.25" Handlebars Reply #2 - 12/23/16 at 02:19:37 If the ends of the bars are also 1.25"....none of the levers or electrical controls or throttle will fit.
Back to top	Someday I will be old......But not today! IP Logged

batman Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 3806 osceola new york Gender:	Re: 1.25" Handlebars Reply #3 - 12/23/16 at 09:17:58 I think 1.25" bars taper back to 1" at the grips ,but you still have to deal with new risers ,for bars that may look to large on our bikes.
Back to top	my old work mates called me MacGyver IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home