SuzukiSavage.com - Just what is this stock carburetor anyway ?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Just what is this stock carburetor anyway ?

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1

Just what is this stock carburetor anyway ? (Read 144 times)

Cobalt95 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 1	Just what is this stock carburetor anyway ? 12/21/16 at 13:28:58 I have a 1996 LS650, It has a Mikuni carb, but I'll be danged if I can find out what model/size it is. I'm also looking for an intake flanges with 90 degree bend, do they exist ? Thanks !
Back to top	IP Logged

norm92de Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1180 El Paso TX Gender:	Re: Just what is this stock carburetor anyway ? Reply #1 - 12/21/16 at 13:47:02 Cobalt95, According to the Suzuki manual the carb is a Mikuni BS40SS 24C4. Main jet 145, pilot jet 52.5, and the pilot jet 1 and 1/8 turns out. It will if it is standard have a plastic washer on top of the needle .110" thick. Hope this helps. I have the manual handy if you need any more specs.
Back to top	2014 S40. Raptor. idle mixture adj.Needle raised one notch. 4000' altitude. Stock jets. Shell Rotella synthetic. IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18101 Camp Springs, Kentucky Gender:	Re: Just what is this stock carburetor anyway ? Reply #2 - 12/21/16 at 13:57:42 Cobalt95 wrote on 12/21/16 at 13:28:58: I'm also looking for an intake flanges with 90 degree bend, do they exist ? You trying to get even less HP from the engine?
Back to top	Someday I will be old......But not today! IP Logged

verslagen1 YaBB Moderator ModSquad Online Where there's a will, I want to be in it. Posts: 28888 L.A. California Gender:	Re: Just what is this stock carburetor anyway ? Reply #3 - 12/21/16 at 15:07:58 If you really want that, best way is to look thru fleabay for possibles. some v twins have dual carbs that 1 or the other will have a 90ish bend. http://www.ebay.com/itm/97-04-SUZUKI-MARAUDER-800-VZ800-MANIFOLD-INTAKE-BOOTS... I don't think this ones big enough since it's a 800
Back to top	Versey's Place Tech Section Index IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10668 Oklahoma Gender:	Re: Just what is this stock carburetor anyway ? Reply #4 - 12/21/16 at 16:57:45 I've not seen an angled carb mount produced anywhere for this bike. I am working on one that will be made of aluminum and have a 45 degree angle. There should be a prototype shortly.
Back to top	IP Logged

Kris01 Serious Thumper Offline Eat, sleep, RIDE! Posts: 3767 Tennessee Gender:	Re: Just what is this stock carburetor anyway ? Reply #5 - 12/21/16 at 19:52:04 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1309246277 Read and learn.
Back to top	There's no problem that a full tank of gas and a sunny day can't fix! 2008 S40, Rotella T 15W-40 w/ZDDP added, Dyna, 140/90-15, Battery Tender Jr., Seat lift, #52.5/150/3 washers, Raptor IP Logged

Ruttly Serious Thumper Offline Thumpers Rule Posts: 5112 Manteca , CA Gender:	Re: Just what is this stock carburetor anyway ? Reply #6 - 12/21/16 at 20:05:14 I have seen the 90ed intake ,they are one off custom made !
Back to top	The Topic Terminator IP Logged

Ruttly Serious Thumper Offline Thumpers Rule Posts: 5112 Manteca , CA Gender:	Re: Just what is this stock carburetor anyway ? Reply #7 - 12/21/16 at 20:10:23 Dave , While the 90 isn't exactly a performance thing , but a greater distance between slide & valve gives mixture more time to atomize,speed up & straighten out !
Back to top	The Topic Terminator IP Logged

Pages: 1

« Home