JIbber Jabber
YaBB Newbies
Offline
SuzukiSavage.com Rocks!
Posts: 33
|
So as per the recommendation from some of you guys, I decided to do my first oil change myself. Everything went as planned until I put the oil in. I drained the oil (found the right bolt), put in a new filter (the right way, I think 😜) and started the filling process. As per this forum, I put in about 2 liters, and and straightened it out but nothing was showing up in the measurement window, so I added maybe another half. I straighter the bike out, and now the oil filled the entire window, so now I'm like holy nuts!! I figured I did something wrong, went back online and read another topic on this forum and came across a similar problem. The recommendation that was given was to let it idle for a little, turn off and let cool for a few minutes, then re-check. I did just that, I checked the oil window and it was between the lines, BINGO!! Thought I had figured it all out, but then this morning (it's like 40 outside), before starting the bike, leveled it and checked again, nada window is empty, I'm like ok, let me ride to work and see what happens. Get to work, about 3-4 miles with street lights. Checked it again, now the oil fills the entire window 😱. Did I put too much in? is this normal? please guide me!
|