Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Add lightness...
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
3
Add lightness... (Read 412 times)
Ruttly
Serious Thumper
Offline
Thumpers Rule
Posts: 5112
Manteca , CA
Gender:
Re: Add lightness...
Reply #30 -
10/23/16 at 20:28:07
Have a ram air idea to create the vaccuum thru oil fill cap and check valve at top vent. So faster I'm going the greater vaccuum , in theory . Super simple & very light weight, check/pcv valve would be only moving part.
What do you think ? Just can't bring myself to drill into my beautiful header!
Back to top
The Topic Terminator
IP Logged
LANCER
Serious Thumper
Alliance Member
Offline
Savage Beast
Performance Parts
Posts: 10668
Oklahoma
Gender:
Re: Add lightness...
Reply #31 -
10/23/16 at 20:52:57
Ruttly wrote
on 10/23/16 at 19:42:46:
Armen , one of my next projects I have lined up is a vintage BSA 500 flat tracker. bored to 585 with a Venolia piston with the mx cam, rockers lightened , clutch basket lightened , stator only goes 1/3 of the way around for less drag ,spark only set up , lots of vintage trick stuff. All the kinda stuff you appreciate. Oh yeah and a original Ceriani road race set of forks, originals are very rare and pricey, seen them sell for up to 2k with the dampener which I also have but won't be used on this bike.
I have a set 0f Ceriani F0rks that have never been 0n the r0ad, ever. 40mm I believe.
I g0t them f0r a ridiculously l0w price.
Back to top
IP Logged
Ruttly
Serious Thumper
Offline
Thumpers Rule
Posts: 5112
Manteca , CA
Gender:
Re: Add lightness...
Reply #32 -
10/23/16 at 21:37:50
Lancer , They are worth bucks
I got a friend really drunk one night and gave him 200 & Betor front end & some other BSA parts and made him throw in a set of plastic fork protectors ,
Can you here me laughing ?
Was tempted to put it on the RYCA tracker !
Just didn't seem right on a jap bike.
Back to top
The Topic Terminator
IP Logged
LANCER
Serious Thumper
Alliance Member
Offline
Savage Beast
Performance Parts
Posts: 10668
Oklahoma
Gender:
Re: Add lightness...
Reply #33 -
10/23/16 at 21:52:56
Ruttly wrote
on 10/23/16 at 21:37:50:
Lancer , They are worth bucks
I got a friend really drunk one night and gave him 200 & Betor front end & some other BSA parts and made him throw in a set of plastic fork protectors ,
Can you here me laughing ?
Was tempted to put it on the RYCA tracker !
Just didn't seem right on a jap bike.
I w0uld like t0 put the set 0n REX but have n0t f0und the right setup f0r it. These forks are pretty l0ng with a l0t 0f range 0f m0ti0n, like y0u find 0n dirt bike forks. I have had difficulty finding a front disc setup that w0uld w0rk 0n it t00. I think I might send the forks & wheel t0 RYCA Shawn and have him create a brake system f0r it. It w0uld be w0rth the $$$$$.
I have had a THING f0r Ceriani's since I had my G0ldstar, which came with a set. I sure d0 miss that bike.
Back to top
IP Logged
Ruttly
Serious Thumper
Offline
Thumpers Rule
Posts: 5112
Manteca , CA
Gender:
Re: Add lightness...
Reply #34 -
10/24/16 at 05:42:33
Oh yeah I forgot about that , in that deal I got the front wheel with disc, caliper,master cylinder,braided hose so I could run TT races too !
30 years later I'm still laughing!
Probably my best con job to date !!!
Back to top
The Topic Terminator
IP Logged
LANCER
Serious Thumper
Alliance Member
Offline
Savage Beast
Performance Parts
Posts: 10668
Oklahoma
Gender:
Re: Add lightness...
Reply #35 -
10/24/16 at 06:50:52
Well, I just happened to be looking on eBay at the right time a few years back and saw this set for sale. A fella had bought a bike shop and these were stuffed back in the corner of a shelf and he just had no use for them. They were obviously an older vintage and he was cleaning house so they had to go. They had never been used, the mount bolt was badly rusted from just sitting, the legs were a bright orange color (though badly scuffed from time), and he put them up for a set price of $150.
I was shocked at the price but confirmed they were Ceriani by the label at the bottom of the leg, and so I SCOOPED THEM BABIES UP !
I took them to a machine shop and had them remove the old rusted mount and press in a new one. A new guy in the shop got the job and he promptly bent the thing during the press! Yep. Fortunately the trees were not damaged in the process. For his ERROR the boss assigned him to machine a new mount bolt and install it...all under the watchful eye of the boss. He did a nice job of it too.
Back to top
«
Last Edit: 10/26/16 at 04:42:16 by LANCER
»
IP Logged
Ruttly
Serious Thumper
Offline
Thumpers Rule
Posts: 5112
Manteca , CA
Gender:
Re: Add lightness...
Reply #36 -
10/24/16 at 19:07:45
Lancer, If they are a long fork & orange are most likely from a late 70s or early 80s KTM, Penton/KTM used a lot of Ceriani forks. Still fetch a good price for someone doing a restore. Very nice forks , top of the line back then !
Back to top
The Topic Terminator
IP Logged
Armen
Serious Thumper
Offline
Half-Witted
Wrench-Jockey from
Jersey
Posts: 1452
Re: Add lightness...
Reply #37 -
10/25/16 at 17:43:19
Continued wankology:
Standard rear axle nut was so tall it threatened to trench the muffler. First I switched to 2 Stainless jam nuts and trimmed the axle. Then I made the mistake of typing '16x1mm titanium nut' into Ebay and one came up.
Knocked the corners off on the lathe. Buffed up a bit on the polishing wheel.
Gizmo gram scale says 20 grams less than stock. And no rust or corrosion.
Back to top
Ti_Axle_Nut.jpg
In theory, theory and reality are the same. In reality, they aren't...
IP Logged
Serowbot
YaBB Moderator
ModSquad
Offline
OK.... so what's the
speed of dark?
Posts: 28668
Tucson Az
Gender:
Re: Add lightness...
Reply #38 -
10/25/16 at 18:16:03
I gained myself a zillionth of a second with this one...
Lever end holes!...
Back to top
Ludicrous Speed !... ...
...
IP Logged
Armen
Serious Thumper
Offline
Half-Witted
Wrench-Jockey from
Jersey
Posts: 1452
Re: Add lightness...
Reply #39 -
10/25/16 at 18:20:33
I'm jealous
Back to top
In theory, theory and reality are the same. In reality, they aren't...
IP Logged
Serowbot
YaBB Moderator
ModSquad
Offline
OK.... so what's the
speed of dark?
Posts: 28668
Tucson Az
Gender:
Re: Add lightness...
Reply #40 -
10/25/16 at 18:24:41
Armen wrote
on 10/25/16 at 18:20:33:
I'm jealous
Rocked your world, didn't it?...
Makes a good deer whistle, too!...
Back to top
Ludicrous Speed !... ...
...
IP Logged
Pages:
1
2
3
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
10/01/24 at 06:26:00
›
General Category
›
Rubber Side Down!
› Add lightness...
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.