SuzukiSavage.com - idle mix screw

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › idle mix screw

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

idle mix screw (Read 87 times)

hammerman47 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 29	idle mix screw 10/17/16 at 08:44:00 Baught a used 2003 650 and am tring to get it set up. Adjusted idle mix screw and found no change. Pulled screw and found spring and no rubber washer at end. Can I get one locally or where do I find one? Thanks James ajuusting
Back to top	IP Logged

Gary_in_NJ Serious Thumper Offline LS650 Cafe Racer Posts: 2633 Amongst the Twisty Roads	Re: idle mix screw Reply #1 - 10/17/16 at 09:03:07 ronayers.com
Back to top	A life-time student of motorcycling. LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG IP Logged

stewmills Serious Thumper Offline Imagination is more important than knowledge Posts: 2641 Auburn, AL Gender:	Re: idle mix screw Reply #2 - 10/17/16 at 09:40:55 If you have a local ACE hardware, it's worth a shot checking there. Not guaranteed they will have one that small, but I have been impressed with how much my local ACE has. Also, make sure you look down in the hole and don't see the rubber washer in there. It doesn't always come out just by pulling the screw...it's in there sorta snug.
Back to top	2008 \| 152/52.5–Air Mix 3/4 \| Rotella T4 \| Seat Lift w/Sheepskin \| Speedo Rattle \| Rear Pulley Shim \| 140/90-15 Rear \| Kaw Front Pulley \| Relocated Rear Signals FREEDOM ISN'T FREE! IP Logged

hammerman47 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 29	Re: idle mix screw Reply #3 - 10/17/16 at 13:47:27 Thanks all. Tried ace no luck. Calling ron ayers.
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: idle mix screw Reply #4 - 10/17/16 at 16:25:44 I thought it just landed in a tapered seat, I didn't know a rubber Anything was involved. Also, dropping idle RPM allows you to pick out the effects of the adjustments.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Kris01

Serious Thumper

Offline

Eat, sleep, RIDE!

Posts: 3767
Tennessee
Gender: male

Re: idle mix screw
Reply #5 - 10/17/16 at 19:35:05

justin_o_guy2 wrote on 10/17/16 at 16:25:44:

I thought it just landed in a tapered seat, I didn't know a rubber Anything was involved.

I thought the same thing.

What do you mean by you "pulled the screw"? Drop the idle and adjust the screw 1/8 turn or so until you find the highest idle speed. Then turn your idle back to the correct 1100 rpms.

There's no problem that a full tank of gas and a sunny day can't fix!

2008 S40, Rotella T 15W-40 w/ZDDP added, Dyna, 140/90-15, Battery Tender Jr., Seat lift, #52.5/150/3 washers, Raptor

IP Logged

stewmills Serious Thumper Offline Imagination is more important than knowledge Posts: 2641 Auburn, AL Gender:	Re: idle mix screw Reply #6 - 10/17/16 at 20:16:34 Ok...let's post this picture again. Ta-da! Rubber washer!
Back to top	IMG_20161006_182230_001.jpg 2008 \| 152/52.5–Air Mix 3/4 \| Rotella T4 \| Seat Lift w/Sheepskin \| Speedo Rattle \| Rear Pulley Shim \| 140/90-15 Rear \| Kaw Front Pulley \| Relocated Rear Signals FREEDOM ISN'T FREE! IP Logged

Kenny G Serious Thumper Offline SuzukiSavage.com The Singles Club...LOL Posts: 1754 Robson Ranch, Denton, Texas Gender:	Re: idle mix screw Reply #7 - 10/17/16 at 20:40:41 Stew, Thank You! A wise man once said: "A picture is worth a thousand words." Kenny G
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: idle mix screw Reply #8 - 10/17/16 at 20:53:55 Yeah, but his brother in law was a photographer and his biggest enemy was an author, so,
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home