SuzukiSavage.com - broke key in fork lock

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › broke key in fork lock - while locked

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

broke key in fork lock - while locked (Read 209 times)

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28886
L.A. California
Gender: male

Re: broke key in fork lock - while locked
Reply #15 - 09/14/16 at 14:00:38

stewmills wrote on 09/14/16 at 13:41:04:

justin_o_guy2 wrote on 09/14/16 at 11:57:07:

How do you turn it?
A pencil with the eraser shortened?

Well..I turn mine with my unbroken key! In the case of the OP, I can only suggest maybe using a flathead screwdriver if the condition of the key in the lock still lets him have a little bit of the key hole for the screwdriver to bite into. Push in, rotate CC about 1/8 turn, release.

Depending on the circumstances... best way to turn it is with the broken off stub.

Versey's Place
Tech Section Index

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: broke key in fork lock - while locked Reply #16 - 09/14/16 at 15:49:14 ... best way to turn it is with the broken off stub. Well, that Just might Be the easy answer. Darn sure worth a try. Turning the bars to get everything free of pressure and giving the cylinder a push and a twist might just get it.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10666 Oklahoma Gender:	Re: broke key in fork lock - while locked Reply #17 - 09/15/16 at 06:36:23 Has he soaked it in WD40 or something similar ? You need every advantage you can get.
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: broke key in fork lock - while locked Reply #18 - 09/15/16 at 07:42:15 Dunno,,but I mentioned oil.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Wylee and Crystal YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 4	Re: broke key in fork lock - while locked Reply #19 - 09/15/16 at 12:00:44 I am still having the same issue. I've pulled the bars back to take the pressure off - using a screwdriver inserted with the broken key to try and turn it - it didn't work. I sprayed WD-40 all in it. I am seriously thinking about just drilling it out. Any advise on exactly how to do that?
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: broke key in fork lock - while locked Reply #20 - 09/16/16 at 12:56:13 As shown, use about an eighth inch drill and go thru the key nearest the pins. The end result will chew up the pins and springs. But you may have to pull the remnants out with a pick or try again with a larger drill. Then you should be able to turn the cylinder with a screwdriver.
Back to top	Versey's Place Tech Section Index IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: broke key in fork lock - while locked Reply #21 - 09/16/16 at 13:18:38 Lock is a pin in a slot. Move the bars till they hit, then back, till they hit, then get them in between. Then drill baby drill,, if it just won't work. Bummer,dude..
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28886
L.A. California
Gender: male

Re: broke key in fork lock - while locked
Reply #22 - 09/16/16 at 13:32:44

justin_o_guy2 wrote on 09/16/16 at 13:18:38:

Lock is a pin in a slot. Move the bars till they hit, then back, till they hit, then get them in between.
Then drill baby drill,, if it just won't work.
Bummer,dude..

Are you aware that the slot is in the steering spindle?
So if you're drilling to remove the "bolt" the entirety of the cylinder will be gone long before you get there?

Versey's Place
Tech Section Index

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: broke key in fork lock - while locked Reply #23 - 09/16/16 at 13:55:24 Yes, I know that. I did leave out Try again with getting it to let go. Then drill. The picture of How to drill Is good. I wasn't suggesting drilling the whole thing. I didn't say Disregard the above picture showing proper technique for drilling a lock.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: broke key in fork lock - while locked Reply #24 - 09/16/16 at 14:07:13 Then I have to say... your instructions make no sense. What are you trying to do? Break the locking pin?
Back to top	Versey's Place Tech Section Index IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: broke key in fork lock - while locked Reply #25 - 09/16/16 at 14:22:33 No, find the easy spot between each side. Just I turned the handlebars Doesn't mean he understands that there is a center spot where the locking pin isn't in contact with either side of the slot. I Specifically pointed out that breaking the lock is a dangerous idea .
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home