Danero wrote on 08/21/16 at 04:09:01:Hi, Danero here from Australia, I just purchased 2016 model and went to do spacer mod when I noticed my needle has a clip with three grooves!
Do I just put clip on lowest groove and thats it or do I fiddle with plastic spacer(has both)
What groove was the clip in when you took it apart?
Did your bike have a surge at low throttle settings? When accelerating slowly did the bike pull unevenly? Raising the needle provides a richer fuel mix from about 1/8 throttle to about 1/2 throttle....and if your bike runs fine in that range you may not need to raise the needle.