Armen wrote on 06/19/16 at 16:10:18:Hey Serowbot,
Lots of time involved in that. Looks very promising.
I'll throw my head in the sheep dip tomorrow and start the cleaning rituals.
I'm also going to work on all the casting flashings that block the airflow along the sides of the head.
I still think removing the left side may be a good thing. With the tank I have, it's pretty tough to get to the plug, and I don't think all that metal is adding as much to the cooling as it blocks airflow to the plug area.
THere is a simple mod to make it swing out and gain access to the plug.
IIRC, it's the right side,, the one that the vent tube runs through. Gotta cut the strap that runs behind the tube, and shorten a bolt by cutting the head off, leaving a bump tall enough to keep it from rotating out. Seat that short bolt and Locktite it. You can use the other bolt normally. It will hold it down and trapped on the short bolt.