SuzukiSavage.com - Head Intake Pipe (flange) SCREW specs?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Head Intake Pipe (flange) SCREW specs?

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1

Head Intake Pipe (flange) SCREW specs? (Read 65 times)

DesertRat Serious Thumper Offline I love rat bikes! Posts: 1569 Arizona	Head Intake Pipe (flange) SCREW specs? 04/16/16 at 10:47:24 anyone know what the specs are for the Head Intake Pipe (flange) SCREWS? Mine keep backing out and the left side is a b!@tc# to get to without removing the carb. I want to swap them out for stainless steel socket head cap screws for easier access. 47: SCREW OEM part # 02112-1620B
Back to top	06suls650013.gif -The silence of indifference makes cowards of men. - http://www.pipeburn.com/home/category/rat IP Logged

Kris01 Serious Thumper Offline Eat, sleep, RIDE! Posts: 3767 Tennessee Gender:	Re: Head Intake Pipe (flange) SCREW specs? Reply #1 - 04/16/16 at 11:16:08 Can't help ya with specs but would threadlocker do you any good?
Back to top	There's no problem that a full tank of gas and a sunny day can't fix! 2008 S40, Rotella T 15W-40 w/ZDDP added, Dyna, 140/90-15, Battery Tender Jr., Seat lift, #52.5/150/3 washers, Raptor IP Logged

DesertRat Serious Thumper Offline I love rat bikes! Posts: 1569 Arizona	Re: Head Intake Pipe (flange) SCREW specs? Reply #2 - 04/16/16 at 12:11:27 Kris, BLUE loctite should remedy the issue, but these are JIS screws, I'm replacing every one of those b@$t@rds *for the difference in Loctite colors - http://us.henkel-adhesives-blog.com/post/All-About-Threadlockers/The-Differen...
Back to top	-The silence of indifference makes cowards of men. - http://www.pipeburn.com/home/category/rat IP Logged

Kris01 Serious Thumper Offline Eat, sleep, RIDE! Posts: 3767 Tennessee Gender:	Re: Head Intake Pipe (flange) SCREW specs? Reply #3 - 04/16/16 at 14:48:46 Yeah, the JIS screws can be a PITA! Pull one out, take it to Home Depot and use their thread checker thingy. I always thread a nut on the original and use the same nut on a replacement to make sure I'm buying a duplicate.
Back to top	There's no problem that a full tank of gas and a sunny day can't fix! 2008 S40, Rotella T 15W-40 w/ZDDP added, Dyna, 140/90-15, Battery Tender Jr., Seat lift, #52.5/150/3 washers, Raptor IP Logged

DesertRat Serious Thumper Offline I love rat bikes! Posts: 1569 Arizona	Re: Head Intake Pipe (flange) SCREW specs? Reply #4 - 04/21/16 at 06:31:29 Thursday -BUMP- for all the members cruising this place only during "work" ... if you know, please let ME know ...
Back to top	-The silence of indifference makes cowards of men. - http://www.pipeburn.com/home/category/rat IP Logged

Pages: 1

« Home