SuzukiSavage.com - Remove Front Turn Signals?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Remove Front Turn Signals?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Remove Front Turn Signals? (Read 110 times)

Joshua8195

YaBB Newbies

Offline

2004 Bobber Build

Posts: 24
Central Florida
Gender: male

Remove Front Turn Signals?
03/09/16 at 17:32:30

uhhh how do i do it?

I cant get the screws on the bottom of them out but im going to try to Dremel them to flat head and it should make it easier. but even if i get them out, I'm not sure how it would come off of the forks.

Oh also, I swapped the rear turn signals for some other ones and when i wired them up the left works perfectly but the right one doesn't work and it blinks the tail light instead. WTF..... Im 100% sure i connected the correct wires to it. Really stumped here....

Thanks! Wink

IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 17826 Camp Springs, Kentucky Gender:	Re: Remove Front Turn Signals? Reply #1 - 03/09/16 at 17:40:04 The screw that goes in the bottom of the aluminum mount holds the turn signal into the clamp.....the small screw on the backside of the clamp holds the clamp on the tube. You will have to take the top triple clamp off to get the clamps off the tubes......which will also require you to take the fork cap nuts off.
Back to top	Someday I will be old......But not today! IP Logged

DesertRat Serious Thumper Offline I love rat bikes! Posts: 1569 Arizona	Re: Remove Front Turn Signals? Reply #2 - 03/09/16 at 19:38:17 You just drop the forks out AFTER you've removed the screws Dave mentioned. They "should" slide off the forks easy peezy ... while your doin' that, might as well change the fork oil too. *edit to add: just swap the 2 wires over for your issue with the rear signal you have them loopy
Back to top	-The silence of indifference makes cowards of men. - http://www.pipeburn.com/home/category/rat IP Logged

Yoshi Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 870 LongIsland, N.Y. Gender:	Re: Remove Front Turn Signals? Reply #3 - 03/09/16 at 19:56:09 Ive dremeled the blinker mount off the forks on one of my projects, sometimes you can dremelba deep enough slot then break it with a flathead after.
Back to top	IP Logged

j_osborne YaBB Newbies Offline Posts: 18 Bothell, WA Gender:	Re: Remove Front Turn Signals? Reply #4 - 03/10/16 at 11:18:38 I literally just unscrewed the side, then took a flat head and pried from the front of the clamp and broke the clamp. It was simple haha. I never planned on putting them back on so it meant nothing to just break 'em off. No damage done whatsoever.
Back to top	IMG_0153.JPG IP Logged

DesertRat Serious Thumper Offline I love rat bikes! Posts: 1569 Arizona	Re: Remove Front Turn Signals? Reply #5 - 03/10/16 at 11:25:41 Quote: ...No damage done whatsoever. Just my humble opinion: except to the wallet ... could have sold them on here in the MarketPlace or on eBay for some $$
Back to top	-The silence of indifference makes cowards of men. - http://www.pipeburn.com/home/category/rat IP Logged

j_osborne

YaBB Newbies

Offline

Posts: 18
Bothell, WA
Gender: male

Re: Remove Front Turn Signals?
Reply #6 - 03/10/16 at 11:28:40

DesertRat wrote on 03/10/16 at 11:25:41:

Quote:

...No damage done whatsoever.

Just my humble opinion:

except to the wallet ... could have sold them on here in the MarketPlace or on eBay for some $$

I feel ya but it just didn't seem worth my time when considering how much I would actually make off turn signals. I am selling some other useful items on the marketplace. Just about ready to post. If you're interested

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home