SuzukiSavage.com - Adjuster check by external means

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Adjuster check by external means

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Adjuster check by external means (Read 176 times)

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: Adjuster check by external means
Reply #15 - 11/30/15 at 08:54:10

I've seen single sticks used. And, being a guy who keeps a stock of music/piano/hobby wire, I Know what bending that stuff takes.
To get accurate bends in desired locations isn't something that just happens by accident. Bend too fast or try for too sharp a radius and it can shatter. Heat it? Yeah, then it crumbles. I guess quenching is in order.

Versy, do you have a bar stock with two rods set into it for a bender?

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: Adjuster check by external means Reply #16 - 11/30/15 at 09:45:00 justin_o_guy2 wrote on 11/30/15 at 08:54:10: Versy, do you have a bar stock with two rods set into it for a bender? No, but I have a vice, a hammer and a pair of pliers. I've done quite a bit of bending using these crude tools, but they get the job done.
Back to top	Versey's Place Tech Section Index IP Logged

norm92de Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1180 El Paso TX Gender:	Re: Adjuster check by external means Reply #17 - 11/30/15 at 11:22:51 Versy, What we need is another window to be able to see the adjuster. Problem solved.
Back to top	2014 S40. Raptor. idle mixture adj.Needle raised one notch. 4000' altitude. Stock jets. Shell Rotella synthetic. IP Logged

Art Webb Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 3007 columbus, Texas Gender:	Re: Adjuster check by external means Reply #18 - 11/30/15 at 11:36:28 Reminds me of a salesman at a gun store I was talking to once Me "Do you have the model with the 3' barrel?" Him "No, but I have a hacksaw and a clear conscience"
Back to top	IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28886
L.A. California
Gender: male

Re: Adjuster check by external means
Reply #19 - 11/30/15 at 11:41:38

norm92de wrote on 11/30/15 at 11:22:51:

Versy,
What we need is another window to be able to see the adjuster. Problem solved. Grin

You don't really need an oil filter do you?
It's too course to do any good anyhow.
Just take the oil filter cover off, toss the filter and cut thru the back wall.
When ever you need to check the adjuster, just take the cover off. Huh

joker.

Versey's Place
Tech Section Index

IP Logged

Art Webb Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 3007 columbus, Texas Gender:	Re: Adjuster check by external means Reply #20 - 11/30/15 at 11:49:18 now that makes me wonder what if you did cut a hole in the back wall? easy adjuster check every oil change probably no feasible though right?
Back to top	IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home