SuzukiSavage.com - Fork (tool) bags interfere with air flow?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Fork (tool) bags interfere with air flow?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Fork (tool) bags interfere with air flow? (Read 79 times)

rong

Full Member

Offline

SuzukiSavage.com
Rocks!

Posts: 120

Fork (tool) bags interfere with air flow?
11/14/15 at 12:53:41

Probably making a mountain out of a molehill, but ...

I was looking at a fork (or tool) bag that is 10" W x 4" D x 6" H. Then I began to think that since the bag extends from the headlight down 6" (but still somewhat above the top of the front fender), maybe it would cut off some of the airflow to the engine for cooling.

So, although this is a very subjective question, I was wondering from any of you, could this hamper some of the airflow to the S40 air cooled engine?

Also, I would be interested in getting any fork bag brand and model names you might like.

Thanks for your help.

Ron G

IP Logged

pg Serious Thumper Offline Posts: 5273 In Transit	Re: Fork (tool) bags interfere with air flow? Reply #1 - 11/14/15 at 13:50:47 I've had one for years and haven't had any issues other than it scratched / rubbed the surface where it was attached to. I think this is the one I have. https://www.chilhowee.net/motorcycle-tool-bag/060628001.html Best regards,
Back to top	I don't make the rules, I just know what they are..... IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 28644 Tucson Az Gender:	Re: Fork (tool) bags interfere with air flow? Reply #2 - 11/14/15 at 14:46:58 There's plenty air up there to go 'round...
Back to top	Ludicrous Speed !... ... ... IP Logged

chzeckmate Serious Thumper Offline Be the person your dog thinks you are Posts: 514 Houston, Texas Gender:	Re: Fork (tool) bags interfere with air flow? Reply #3 - 11/14/15 at 23:57:09 You'll be fine. Here's my fork bag. I really like it. I removed the cross and put on a skull and crossbones. I have the whole set...skull and crossbones all around too. http://www.motocrossgiant.com/ProductDetails.asp?ProductCode=108862tr&click=9...
Back to top	'05 S40, dyna muffler, rejet, high flow filter, Mobil 1 Racing 4T, Shinko 230 set with 140/90 rear, raptor, seat lift, LED running lights/signals, tach, reversed risers, homemade MR10 Lexan windscreen IP Logged

rong Full Member Offline SuzukiSavage.com Rocks! Posts: 120	Re: Fork (tool) bags interfere with air flow? Reply #4 - 11/17/15 at 12:04:25 Sounds like there is enough airflow to keep things cool. Will be looking at your suggested tool bag ideas. Thanks, Ron G
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home