95 LS650
So I thought "cleaning up" the wiring harness would be easy-ish. Probably is but I've done something horribly wrong and am blowing fuses as soon as the battery is connected (without key in ignition even).
To start:
I replaced the start switch with a LED momentary switch. I connected the orange/white wire that ran to the ignition coil, ignitor, and engine stop switch to the "common" and the yellow/green wire from the clutch lever to the "normally open". I then connected the black/blue wire from the side stand diode (ran to the neutral indicator) to "-" and the orange wire from the neutral indicator to the "+". Don't know if that is working yet b/c the fuse keeps blowing
I also changed the start/stop switch to a lighted rocker switch with the orange/white wire connected to the 1, the orange/black wire connected to the 2, and a ground on the 3.
I also replaced the original turn signal switch housing with a smaller housing but am 85% sure I have that wired up correctly...
I grounded everything else exactly as shown in the wiring diagram...
I'm an electrical noob and shouldn't have messed with the harness at all but you can't tell me nothing
If anyone has an advice I would be greatly appreciative!