SuzukiSavage.com - Rich, lean or just right? Plug pics

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Rich, lean or just right? Plug pics

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Rich, lean or just right? Plug pics (Read 116 times)

jwenrich

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 49

Re: Rich, lean or just right? Plug pics
Reply #15 - 10/03/15 at 09:09:42

Ill keep a close eye on my oil, thanks Kris.

50 is stock right? I have tried to lower the pilot, but it gets really pingy and sounds terrible, no matter the turns of the mixture screw. I think Im right about 1 turn out with the 55.

This is the pilot I have in: http://jetsrus.com/a_jets_by_carburetor_type/jets_mikuni_BS_30-96_pilot.htm

It has holes in the jet. Maybe ill order the 52.5 one here:

http://jetsrus.com/a_jets_by_carburetor_type/jets_mikuni_N151.067_pilot.htm

They are slightly different.

2012 Savage: dyna American custom, Raptor petcock, Elev: 200ft 55, 147.5, 2/3 Spacer

IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18099
Camp Springs, Kentucky
Gender: male

Re: Rich, lean or just right? Plug pics
Reply #16 - 10/03/15 at 18:02:33

If you are ordering jets - then get the ones without the holes as that is what the bike came with.

If you find a bike shop and all they have is with the bleed holes....they really don't work any differently in the Savage carb. The bleed holes don't have any source of air or fuel in this carb.....so they don't do anything.

Someday I will be old......But not today!

IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home