SuzukiSavage.com - No .066 slide needle spacer in my realm

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › No .066 slide needle spacer in my realm

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

No .066 slide needle spacer in my realm (Read 55 times)

Ronnie

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 7

No .066 slide needle spacer in my realm
09/20/15 at 14:47:55

It's amazing how little do-hickeys are hard to find on Maui. Both my mechanic and I have been looking all over the place but zip results.

We don't want to shave down the stock one because we're screwed if it wasn't the right fix.

We want. to try the spacer before we start messing with jets.
My 2002 S40 is missing a bit around first and second gears. If you give it mucho throttle it helps a bit. But I don't want to have to give it a bunch of throttle. It idles great and at the right RPM's.

So my crazy request is if any of you out there has either a #4 Teflon spacer or a .066 equivalent I'd be happy to buy it from you.

Thanks, Ron

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: No .066 slide needle spacer in my realm Reply #1 - 09/20/15 at 15:41:44 just stack up 2 or 3 #4 washers instead of the spacer, doesn't have to be teflon or nylon, stainless steel or aluminum are fine. you can even get some hard plastic tubing and cut it to the length you want. But, if you insist, I can make you a spacer out of aluminum.
Back to top	Versey's Place Tech Section Index IP Logged

Kris01 Serious Thumper Offline Eat, sleep, RIDE! Posts: 3767 Tennessee Gender:	Re: No .066 slide needle spacer in my realm Reply #2 - 09/20/15 at 20:39:57 That's exactly what I did. I think they were brass. Don't quote me on that!
Back to top	There's no problem that a full tank of gas and a sunny day can't fix! 2008 S40, Rotella T 15W-40 w/ZDDP added, Dyna, 140/90-15, Battery Tender Jr., Seat lift, #52.5/150/3 washers, Raptor IP Logged

digitaltrucker YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 28	Re: No .066 slide needle spacer in my realm Reply #3 - 09/21/15 at 05:41:37 If you can find someone who has a small mom-and-pop style machine shop they could make a spacer for you out of any material you want...and to exact specs.
Back to top	IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18099 Camp Springs, Kentucky Gender:	Re: No .066 slide needle spacer in my realm Reply #4 - 09/21/15 at 06:06:55 Seriously.....any of the member on this site would most likely be willing to put a few #4 washers in an envelope and mail it to you. The washers are likely only 3 cents each.....I have no idea what a stamp to Maui costs?
Back to top	Someday I will be old......But not today! IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home