justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
Yeah, filter,too. Drain oil, pull the filter, then work on the carb, let stuff air out inside. Make sure the float is floating. Look for crud in the bowl that might have kept the float valve from seating. Inspect the tip of the Needle that closes into the seat. The taper should be a line, no shoulder. If the float is floating and the Needle looks good, seat good, and no crud, carefully inspect the rod and pivot of the float,
|