MnSpring
Serious Thumper
Offline
Younger than most people my age.
Posts: 9345
Minn
Gender:
|
Last week, came upon the County doing some, ’Shovel Leaning Practice’. (They were, practicing in one lane of a Co Rd, so traffic was the, ‘other’ lane. And it is a ‘one way’, with people at both ends, telling you to stop or go)
Anyway, coming to this I slow down, and see the, ‘red’ sign, and know it says, ’STOP’, but it was blurry, (MC Vibrations).
So Decided a Engine Mount was loose. Because, I encountered another ’shovel leaning practice’, several months ago, and could read the sign just fine. ((BUT, they Are getting better, this one, they were, ‘almost’, Synchronized. ))
Today, took off the bags, (use ’throw overs’, as ’throw overs’, just zip tie the bottoms to the wire frames, guarding from the wheel) Took off the seat, the tank. It Had to be one or more of the top three. NOP. they were, ALL tight.
Well as long as I was their, checked everything, then buttoned it up again. So went underneath, front two, perfect. The BACK one was loose.
Took for a little test ride around the block, (here on tar, it 10 miles) Vibrations Much less, Of course some still their, hey, it’s Thumper.
Moral of story. A 5 min check/tighten. Could have been done, Instead it was a hour, check.
Check the easy, first.
|