rustybolts
YaBB Newbies
Offline
SuzukiSavage.com Rocks!
Posts: 12
Erie, PA
Gender:
|
OK, thank you.
When I replace the air-cleaner housing, what should I be aware of with the vent tube from the crank-case?
if I put on some other air-intake/filter without replacing the housing, what can be done with the crank case vent tube?
+++++++++++++++++++++++++++++++++++++++++++++
I had already been perusing this forum and began troubleshooting my motorcycle. Here is what I had done so far:
>replaced the petcock with a raptor petcock >drained old gas and filled with fresh >replaced the battery with one recommended on this site >replaced the sparkplug with a champion plug
This is all fine and dandy.. but it still wasn't starting.
I believe that due to the failed stock vacuum petcock the engine is flooded, but while trying to start with starting fluid (this worked to get the engine going for 10-30sec, then it would cut out) the engine backfired and ignited starting fluid at the air-intake.
NOW, my air intake assembly is melted. there is possible wiring harness damage, and I'm not sure how much more money I should throw at my old thumper.
|