SuzukiSavage.com - can't get her started

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › can't get her started

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Send Topic

Print

can't get her started (Read 193 times)

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28886 L.A. California Gender:	Re: can't get her started Reply #15 - 06/23/15 at 20:03:59 Art Webb wrote on 06/23/15 at 20:00:05: if you're going to dip it you had best get that float off and get the needle and seat out, or the dip will ruin them no plastic and no rubber can go in the dip, only metal the yamadip is safe for rubber and plastic.
Back to top	Versey's Place Tech Section Index IP Logged

Art Webb Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 3007 columbus, Texas Gender:	Re: can't get her started Reply #16 - 06/23/15 at 20:42:06 I am shocked something that actually works won't harm that stuff learned another new thing
Back to top	IP Logged

jspace YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 48	Re: can't get her started Reply #17 - 07/25/15 at 12:13:54 Finally got the carb stripped all the way down. Tested the float in boiling water and it looked fine no bubbles. The float valve looks ok as well. I'm getting ready to dip the carb. Hope this finally works.
Back to top	IP Logged

jspace YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 48	Re: can't get her started Reply #18 - 07/26/15 at 12:52:52 after becoming very intimate with the carb stripping it to nothing i must say the carb dip worked. Put it all back together and she fired right up. Thanks for all the help.
Back to top	IP Logged

jspace YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 48	Re: can't get her started Reply #19 - 07/26/15 at 13:00:24 I did manage to lose the washer behind that clip (#25 pg 189 of clymers). Does anyone happen to know the dimensions of that washer especially the thickness and if it was metal or plastic?
Back to top	IMG_3609.JPG IP Logged

Pages: 1 2

Send Topic

Print

‹ Previous topic | Next topic ›

« Home